ZWO Seestar S50 Solar Finder Assist Accessory Dovetail Mount Shoe

Description: This is the most versatile accessory set 3D_Print with PETG material for users who want more durability, higher temperature resistance, and less brittle than PLA material. According to the filament manufacturer, the heated distortion temperature for PETG material can hold up to 70°C/158°F, while PLA can only up to 50°C/122°F. The reason for higher prices is that the Matte PETG material costs more and takes longer to 3D_Print compared to Matte PLA. The Items for sale: Items are 3D Printed in JAREES PETG Black Matte and Orange PETG for the Solar Finder Assist. QTY (1): Accessory Dovetail Mount with Thumb Screw QTY (1): Solar Finder Assist (Orange PETG) The opening on the filter holder will fit other 3rd party 50mm Dew. If needed you can thread in an M3 screw to the small hole on the 3DPrint part, which will bulge on the other side of the wall for tighter fitment. Do it slowly with some force applied for the M3 screw to thread in. Over-tighten/force the screw will punch through the thin 3D print wall (~0.7mm thick). Due to the nature of the 3D print filament, it will still shine/gloss after 3D printing the parts in Matte PETG. But it is way less compared to None Matte PETG. SeeStar S50Telescope, Phone, Tablet, Solar Len Filter, other deep sky lens filter, EZ Finder II, and Stand not included. Item will ship in 1-2 business days. Disclaimer: ***NOTE*** Due to the 3D print nature of this product, your results may vary. Sorry, there are no returns or exchanges. I am NOT responsible for any damages to your EAA telescope due to the result of the use of this product ***NOTE***

Price: 20.95 USD

Location: Arlington, Texas

End Time: 2024-10-22T07:18:58.000Z

Shipping Cost: N/A USD