ZVS 3000W Induction Heating Heater Module / Coil / Pump DIY Home Casting Furnace

Description: ZVS 3000W Induction Heating Heater Module / Coil / Pump DIY Home Casting Furnace This Induction Heater need 3000W DC power supply to driver heating material. (This listing NOT included a DC 3000W Power Supply） Power supply unit purchase link: https://www.ebay.com/itm/283429848154 With power supply bundled link: https://www.ebay.com/itm/283542404322 or https://www.ebay.com/itm/283961337967 (Recommend DC 48V or 53.5V power supply）The diameter of induction heating coil is not recommended to be modified. Gold, silver, copper and other non-ferrous metals can not be heated directly. Graphite crucibles should be arranged to be heated in crucibles. Application DIY small iron and steel parts for quenching, annealing heat treatment, melting point below 1500° C metal smelting ( Graphite crucibles), CNC Tool Heating, small electromagnetic furnace, etc. For larger parts, it is recommended to add an ammeter to monitor the current to prevent the main board from burning down. Small iron and steel parts for quenching, annealing heat treatment, melting point below 1200 C metal smelting, DIY small electromagnetic furnace, etc 1. Size: 120*265*115 (unit: mm) (Manual measurement) 2. Working voltage: DC48V-53.5V 3. Maximum operating voltage:DC48V-53.5V 4. Maximum operating power: DC 53.5V 2700W (Rated Power) / 3000W (Peak Power） 5. Maximum working current: 53.5V 56A; 48V 57A; Rated 50A; 6. If the heater not to work, Please turn off the power supply and extend the heater service life. 1. In any case, can not no-load must install the copper tubing(no load is placed on the output port of the empty load). If do not install the copper tubing, once the power is turned on, the board will emit high-frequency noise, which will result in complete destruction of the MOS tube. 2. When using a switching power supply, care must be taken because high-power switching power supplies typically have a slow-start function, that is, they slowly rise at the beginning of the output voltage, and if the voltage rises to 11V, the induction heating circuit is turned on because the voltage is insufficient. Cause the circuit does not start vibration, so that the two MOS tube at the same time conduction and burned components, so be sure to switch power supply voltage stability and then access the induction heating circuit; 3. This circuit is very strict power supply requirements, 12V power supply must use more than 500W power supply, 24V is greater than 1200W, 36V is greater than 2000W, 48V is greater than 2600W; 4. No matter what voltage is used, as long as the operating current is less than 56A, the circuit will not be burned out. Therefore, a 50A fuse can be used to protect the circuit during high-power operation. 5. High-power operation is inevitable due to heat, so you should use the fan top blow to effectively dissipate heat while working. 6. The operating voltage must not be lower than 12V. 7. Copper pipe and water pipe connections, the need to seal to prevent water leakage. In the Box: (NOT included the Power Supply Unit, if need the PSU, please feel free to contact us) 1x 3000W Induction Heater Module 1x Copper Coil 1x Mini Water Pump 1x 12V 3A Adapter 1x 2M Water pipe International Buyers ? Please Note:Import duties, taxes and charges are not included in the item price or shipping charges. These charges are afforded by the buyer.Please check with your country? customs office to determine what these additional costs will be prior to bidding/buying.

Price: 129.98 USD

Location: GD

End Time: 2024-02-04T01:15:22.000Z

Shipping Cost: 0 USD