Set (2) GTS OA+, Level 3+ 10"X12" Mosaic Ceramic Armor Plates (Lightweight)

Description: AMAZING LIMITED TIME OFFER!GILLIAM TECHNICAL SERVICES - EMERALD ISLE, NC - UNITED STATES OF AMERICA GTS has been in the armor business for 18 years.WE ARE NOT RESPONSIBLE FOR RETURNS RELATED TO PLATES NOT FITTING IN YOUR CARRIER. Please make SURE that these plates will fit before ordering. Thanks!Specifications: MODEL: GTS-OA+**This model complies with NIJ Standard 0101.06 for Ballistic Resistance of Body Armor.**Updated test report for our OA+ plates included in image gallery as of 21 July 2023. This test included (6) shots against the powerful 7.62mm x 51mm projectile and DROP testing and submerged water testing (see test image for details). This test included DROP testing and submerged water testing (see test report for details).Some eBay sellers claim that their plates are NIJ Level III certified because of passing a 7.62mm x 39mm ballistics test. Remember that Level III REQUIRES resistance against the 7.62mm x 51mm (M80), not the 39mm for successful RF1 OR Level III (0101.06). Ask to see their 7.62x51 test results!This armor plate has been tested in accordance with NIJ 0101.06 AND NIJ 0101.07(draft) standards.Unlike other sellers, we have tested our ceramic against every RF2 threat detailed under the new NIJ 0101.07 (draft) standard. NIJ 0101.07 Section 12 states:12.1 Hard armor shots required12.1.1. For P-BFD testing to RF1 or RF2, 24 fair hits are required, and three shots are required per test item.12.1.3. For Ballistic limit testing to RF1 or RF2, 24 fair hits per test threat are required, and three shots are required per test item.In an effort at transparancy and as evidence that our plates perform as advertised, we have tested our armor against the following calibers (RF1 and RF2 Categories - with test reports from NIJ-approved labs):7.62x51mm, 7.62x39mm (MSC, AK-47), M193, M855, M855-A1. This armor plate is made in China with our materials by partner companies. The OA+ line meets both NIJ 0101.06 and NIJ 0101.07 standards for the challenging RF2 category (special threat). For more information, please refer to our testing reports. The plates will be supplied with black front and rear covers with appropriate ballistic tags.A note about our NIJ-approved labs test reports: For your consideration - We include test reports for ALL ceramic batches and backing material combinations. Weight: Approximately 5 pounds (+- 5%). Slight variations in weight are normal due to tonnage output on press and UHMWPE sheet and ceramic manufacturing tolerances. This is normal.Thickness: Approximately 13/16" Size: 10" wide x 12" tallColor: Black1" partial rubber and polyethylene edge Standard: NIJ Level III+ Rifle Plate Ballistic Material: Alumina ceramic with UHMWPE backer plate. Ballistic Performance: 7.62x39mm AK47 MSC, 7.62X51mm M80 5.56X45 SS, 109/M855 (penetrator)/M193, multi-hit capable. Shape: Single curved. Outer Material (cover): Durable black waterproof nylon with plate edge padding and strike face rubberized coating. Shelf Life: Minimum 5 years Plates can be used as front or rear plates. Make sure that the STRIKE FACE (see ballistic tag) is situated toward the threat and the plate(s) is carried in a quality vest or carrier. Superior mosaic ceramic configuration (as opposed to monolithic) allows for multi-hits without performance deterioration of surrounding ceramics. In compliance with the eBay military items policy (see end of this listing) - we have developed the following matrix involving this product: This item is listed on eBay’s US website. The buyer, seller and the item are located in the USA. This product will ONLY be shipped within the USA and NOT to Connecticut or New York. By purchasing, the BUYER certifies that they are a US citizen or permanent resident and are not a convicted felon. Buyer certifies that they are 18 years old or over and can legally purchase and possess the item in their jurisdiction. By purchasing, the BUYER certifies that they shall use the item for personal use only and has no intention of exporting the item outside of the United States. This is NOT a military item (not issued by a military entity). This is a level III hard armor SAPI cut plate (non-military). This item is manufactured by GTS in Emerald Isle, North Carolina. NOTICE: ALL PURCHASES are subject to the Shipping, Returns, Warranty and LEGAL NOTICE in our eBay store. **This model complies with NIJ Standard 0101.06 for Ballistic Resistance of Body Armor.** We endeavor for all listings to abide by eBay’s military items policy. Here is the policy, in full – from the eBay website: We comply with every line of the policy. Items identified on the US Munitions List found in the ITAR Part 121 that are allowed such as commercially available body armor, firearm scopes, and night vision goggles must follow all applicable laws and meet all of the following criteria: The item is listed on eBay.com (our US website) (complied with - see above) The buyer, the seller, and the item are all located in the US (complied with - see above) The seller specifically states the item will only be shipped domestically (within the US) (complied with - see above) The buyer certifies that they're a US citizen or permanent resident (complied with - see above) The buyer intends to use the item for personal use only and has no intention of exporting the item outside the US (complied with - see above) Body armor is allowed if: It isn't military issued (complied with - see above) It's a level I, II, or III body armor or Small Arms Protection Insert (SAPI) plate which is included in the listing (complied with - see above) The listing includes the manufacturer and model designation with a clear picture that verifies the information (complied with - see above and product images) The listing includes the following disclaimer, "This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor" (complied with - see above).

Price: 189 USD

Location: Emerald Isle, North Carolina

End Time: 2023-12-12T19:26:45.000Z

Shipping Cost: 0 USD