Description: Scissor Car Jack 2 Ton Emergency Lift Tire Change Kit Ratchet Lug Wrench CompactThe scissor jack, with Labour-saving spanner, can extend from 110mm(close position) to 390mm, more than enough to lift most vehicles. Easy to operate using the chromed crank with speed handle. Minimum height: about 110MM Maximum height: approximately 390MM Lifting: 2.0T Color: Black Material: Steel Net weight: 2KG Item Size: 43*14*11 (L×W×T) Scope: Suitable for small and medium sized vehicles. Such as: cars, Buick, Santana, Vietnam and other vehicles. Packing include: Scissor jack * 1 Labour-saving spanner * 1 Attention: 1. Study, understand and follow all instructions before operating this device. 2. Do not exceed rated capacity as designated by the height/capacity curve.(Sea below) 3. Use only on hard level surface. 4. Use for emergency tire changing only. 5. Never get beneath the vehicle when it is supported by the jack. 6. Activate the hazard warning flasher,turn off ignition, set parking brake, move automatic shift selector to park position. In case of a manual transmission, move gear selector into reverse position. In addition, the wheel diagonally opposite from the wheel being lifted shall be chocked in both directions. 7. Lift only on areas of the vehicle as specified by the vehicle manufacturer. 8. Follow tire changing procedure as per the vehicle manufacturer's owner's manual. 9. No alterations shall be made to this product. 10. Failure to heed these messages may result in personal injury and/or property damage. HEIGHT/CAPACITY CURVE This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position. Before Use: 1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts. 2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock. 3. If the jack is found to be damaged, it should be removed from service until properly repaired. OPERATING INSTRUCTIONS 1. Insert the jack handle into the hole of the handle socket. 2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket. 3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise. 4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly. CARE AND MAINTENANCE: 1. When jack is not in use, lifting arm should be in full down position. 2. Always keep jack clean and keep the screw and bearings well lubricated. 3. Store the handle with care. PaymentDelivery detailsTerms of salesWelcomeContact usPayment 1.Please check the item after you receive it,please keep us posted if you have any confusion or porblems about your order .We will give you reply and best solution within 1 working day. 2.Pleasedon't leave any neutral/negative feedback or open a case when you have problems with our product , we promise to try our best to help and not let your interest be damaged.3.If you are satisfied with our product,please leave us a 5 stars positive feedbackand we will do the same for you. Delivery detailsSincerely thank you for choosing us, we suggest you reading our shipping terms and conditions.1.All items are shipped within 1-2 business days after we confirm your payment and your shipping address.2.We only ship our items to the areas that our logistics provider covers.3.To ensure you receive item safely, please offer the concrete and complete shipping address4.Please keep the consistency of the address from Paypal and eBay.5.Sometimes your order may be impacted by extreme bad weather, strikes or other unexpected events.6.If there are any problems with your order, including late delivery or being lost, please do not hesitate to contact us. We are happy to offer solutions to your inquiries.Terms of sales1.We accept PayPal only!2.Please keep the consistency of the address from Paypal and eBay.3.Payment must be received within 3 dayssince you won the item, or eBay will launch Unpaid Reminder Against you.Welcome Contact usIf you have any question,Please no hesitation to contact us via ebay message, we will reply you within 24 working hours.
Price: 26.7 USD
Location: Walton, Kentucky
End Time: 2024-09-09T08:24:01.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Return policy details:
Brand: Autofather
Color: As the main picture shows
Custom Bundle: No
Manufacturer Part Number: US0686494391970
Modified Item: No
Non-Domestic Product: No
OE Spec or Performance/Custom: OE Spec
Other: For Nissan X-Trail Lexus Buick Audi Jeep Compass
Other Attribute: For Ford Honda Kia
Other Part: For TOYOTA CRV RAV4 Honda Civic Subaru Mazda 3
Placement on Vehicle: Left, Right, Front, Rear, Upper, Lower
Finish: For Hyundai Tuscon VW Chevrolet Cruze Blue Bird Is
UPC: 0686494391970
Manufacturer Warranty: Lifetime
Type: SCISSOR JACK W/ Labour-saving spanner