Rupert Neve Designs Shelford 5052 #0090 (Used)

Description: Category 500 Series Modular Synth Keyboards Microphones Preamps Dynamics Equalizers Monitoring Computer Audio Interfaces Software Beat Production VINTAGE KING APPROVED This item has been carefully inspected, tested and serviced by our expert tech team. All vintage, used and open-box items we sell are backed by an industry-leading warranty. Expand your studio with confidence knowing that we have you covered. Rupert Neve Designs Shelford 5052 #0090 (Used)Mic Pre / Inductor EQ The Rupert Neve Designs Shelford 5052 echoes the simple and definitive 1073 feature set with a vertically-oriented mic pre, high pass filter, and 3-band inductor EQ, while also incorporating modern capabilities like the variable Silk/Texture control from the Portico II Series and simultaneous pre/post “tape” operation. Utilizing Class A, discrete, ±24V topologies with custom-wound transformers and inductors, Rupert Neve designed the 5052 as a vintage-style channel strip that captures the soul of his classic designs, without the previous compromises.The Mic Pre Like Rupert’s designs from his time in Shelford, the 5052 preamplifier has 72 dB of discrete, Class A gain coupled with serious square-core transformers. Unlike the classics however, the output transformer features the Silk Red/Blue and Texture controls from the Portico II Series to hone the harmonic content and tonality of the output stage. By engaging these controls and sufficiently driving the output, the 5052 can produce up to 4-5% THD (primarily 2nd order, some 3rd order), bringing a richness and thickness to tracks when desired with no danger of overloading the output stage. With Silk disengaged, the output is modern and pristine, yet still retains Rupert’s signature larger-than-life transformer sound. The mic pre section also includes a sweepable 20-250Hz high-pass filter, Mic/Line selection, 48V phantom power, and polarity reverse.Dual I/O Paths Following the preamplifier, the 5052 has a transformer-coupled output, which allows the 5052 to feed a tape machine or DAW directly from the mic pre while still using the EQ and Silk/Texture in a dedicated analogue mix path such as that found with a 5088, 5060 or vintage console. This output can also be used to insert a separate compressor between the mic pre and the EQ, or it can allow the 5052 to work with two separate sources. When the “TO EQ” button is engaged, the mic pre signal is routed directly into the EQ such that the mic/line input signal flows through to the main output as a single channel strip.The “best of the classics” EQ The 3-band, custom-tapped inductor EQ on the 5052 was inspired by RND’s favorite portions of Rupert’s vintage EQ designs. The low frequency band is primarily based on the 1064, which is renowned for its creamy, resonant bass. Unlike the 1064 however, the LF band on the 5052 can be used as either a shelf or a peak filter, adding punch, dimension, and immense control to your low end. The 5052’s inductor midrange band is based on his prized 1073 EQ, which is ideal for sweetening vocals and instruments while bringing them forward in a mix. Additionally, the mid frequency band’s proportional “Q” response makes it well-suited for minimizing problematic frequencies in a source. The 5052’s high frequency band is a hybrid vintage/modern design, blending inductor circuitry from the 1073 with capacitor-based topologies to achieve the vintage tones with enhanced control. As Rupert originally intended with his most prized classic designs, each EQ section uses low-feedback, Class A discrete electronics to prevent low-level artifacts and harshness from detracting from the tonal shaping. The EQ circuit itself, however, is a decidedly modern updated design using techniques and components that were simply not available 35 years ago, and should not be considered a “clone”.Power, Connections and Mounting The 5052 receives ±24V rails from an external DC power supply using a 4-pin connection. There are currently two options available: the RND 5-way brick supply and the RND 25-way 2U rack-mount supply. The back panel of the 5052 includes three XLR-F connections for Mic In, Line In, and EQ In, and two XLR-M connections for Mic Out and Main Out. The 5052 chassis is a “half-rack” format, and can be mounted in RND’s new 2–way and 4-way vertical racks in addition to the existing 9-way racks and the 5088 penthouse.Controls:MIC GAIN: A 12-way precision rotary switch controls gain from 0 to 66 dB in 6 dB steps.SILK/TEXTURE: Pushing the Silk button cycles the silk modes from red silk to blue silk to off. Silk reduces the negative feedback on the output transformer, adding harmonic content as the texture is increased. Red Silk accentuates the saturation in the mid and high frequencies, similar to that of the red silk mode on the Portico II Channel. Blue Silk accentuates low frequencies. By manipulating the Texture control, the amount of Silk can be changed from essentially absent, to roughly 4-5% THD (mostly second order) depending on how hard the output transformer is being driven.INDUCTOR EQ: The first inductor based EQ designed by Rupert Neve since the mid 70’s, the 5051 EQ is very reminiscent of Mr. Neve’s classic EQ, while providing a thoroughly modern performance.HPF: 12 dB/octave High Pass variable from 20 - 250 HzLOW EQ: ±15dB Shelf or peak, selectable at 35 Hz, 60 Hz, 100 Hz or 220 Hz.MID EQ: ±15 dB with 6 center frequencies; 200 Hz, 350 Hz, 700 Hz, 1.5 kHz, 3 kHz and 6 kHz, with High Peak switch to narrow the bandwidth or increase the Q of the filter.HIGH SHELF: ±15 dB Shelf or peak selectable at 8 kHz to 16 kHz.TRIM: Continuously variable +/-6 dB level trim control.+48V: Engages phantom power on the microphone inputPOLARITY: Push button inverts the polarity of the signal path, and illuminates when engaged. The symbol “Ø” is often used to denote opposite polarity.HIGH PASS FILTER: The high pass filter is continuously variable from 20 - 250 Hz and engaged by the HPF switch, which illuminates when engaged. It is a valuable aid in any signal chain, but particularly so in a microphone preamplifier. Signals below the selected frequency are attenuated at a rate of 12db/octave, getting rid of proximity effect, building rumble, air handling, motor hum, etc.LEVEL METER: An Eight-segment LED bar-graph meter displays output level (pre-Silk). The color range proceeds from green for lower level signals, yellow for intermediate signals, and red for high levels. When the 5052 is clipped, the highest red LED will hold longer depending on how far above the clip threshold the signal was. About Us Since 1993, we have been committed to equipping our customers with the very best gear, advice, and personal service anywhere. We believe that great sound can be achieved at any budget. We also believe that the ambitions of our customers should always come first. For us, it's about building long-lasting relationships, not just selling gear. And over the years, those beliefs have turned customers into friends and family. Whether you're just starting out, or a seasoned pro, we're here for you, no matter where your audio travels may take you. Shipping Policy Free ground shipping to the lower 48 states Via FedEx. All of our items ship via FedEx. On checkout, it may look like you are selecting a UPS shipping method, but the item will be shipped via the equivalent FedEx method. Import Duties and Tax Since import taxes and/or duties that your government might impose on products shipped from the United States may apply, you (the customer), are solely responsible for shipping charges, taxes, and duties, once goods arrive in your country. Undeliverable/Rejected Package If your package was rejected by your local Customs Bureau or the shipment could not be delivered and was returned to Vintage King Audio for any reason, we are not responsible for the shipping costs. Free Extended Warranty All new items that Vintage King carries are subject to our FREE extended warranty protection. Basically, if the manufacturer offers a 1-year warranty on your product, then you are covered under the same warranty terms for a total of 2 years from the time of initial shipment. Likewise, if the manufacturer offers a 5-year warranty, then you receive a total of 6 years of coverage when purchased through Vintage King. We add 1 year to your standard manufacturer's warranty period, FREE of charge, whatever the manufacturer's warranty period may be. Duties and tax for warranty and damage replacement items International Duties and tax for warranty and damage replacement items may apply. Even though you may have paid shipping, taxes or duty on your original order, it is IMPORTANT to understand that your government may impose duties and taxes for warranty items or replacement items damaged during shipment from the United States for the new order. You (the customer), are solely responsible for shipping charges, taxes, and duties, once goods arrive in your country. Used Item Warranties Vintage King offers an industry-leading level of technical service and warranty support on our used and vintage items. Our used item warranty periods are as follows: Analog Outboard Gear 1 Year Microphones 1 Year (excluding capsules, tubes, and ribbon elements) Speakers 1 Year (excluding drivers) Digital Outboard Gear 30 Days Return Policy We do our best to help you choose the perfect gear, but if you don't love it in the first 30 days after receipt, please contact us through eBay for a return authorization. Note: Software is not returnable or refundable. What Are "Demo Deal" or "B-Stock" Products? Our Demo Deals and B-Stock products offer a unique opportunity to save big on near-mint condition, fully warrantied gear. These items have been opened for demonstration purposes and put back in the box without extended use. All original factory accessories and packaging are included. In addition to the manufacturer's warranty, Demo Deal and B-Stock items also come with an additional 1-year of warranty coverage from Vintage King, free of charge, so rest assured that not only are you saving big by purchasing a Demo Deal/B-Stock item, but you will also receive the same level of world-class support from Vintage King as with the purchase of a factory-sealed unit. Taxes Vintage King collects sales tax for shipments to Alabama, Arkansas, Arizona, California, Colorado, Connecticut, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, Nevada, New Jersey, New Mexico, New York, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Utah, Vermont, Virginia, Washington, Washington D.C., Wisconsin and Wyoming. Partial and complete tax exemptions may be available in your state. Contact us through eBay for details. Note: eBay may collect sales tax in states not listed above.

Price: 1989.75 USD

Location: Ferndale, Michigan

End Time: 2024-11-01T21:00:56.000Z

Shipping Cost: 20 USD