Radial BTProV2 Stereo Bluetooth Direct Box

Description: DJ GEAR INSTRUMENT GEAR LIVE SOUND RECORDING MICROPHONES HEADPHONES ACCESSORIES SOFTWARE LIGHTING BUNDLES Authorized Dealer Radial BTProV2 Stereo Bluetooth Direct Box - Used Stereo Bluetooth Direct Box - Used - Description The BT-Pro V2 is a Bluetooth-enabled direct box that connects wirelessly to smartphones, tablets, and other mobile devices and provides a pair of balanced analogue audio outputs to feed a PA system. Each BT-Pro V2 has a unique identifier, allowing multiple units to be used within the same building. The latest model of the BT-Pro can also be powered via 48V phantom from a mixing console. Wireless connection, professional audio The BT-Pro V2 makes it easy to quickly connect to any smartphone, tablet, or mobile device for high quality audio playback through a sound system. It wirelessly pairs over Bluetooth, eliminating the need to search for adaptor cables and providing you with the freedom to move around while staying connected. Superior audio quality is provided using the Bluetooth 5.0 protocol, allowing the BT-Pro to be used for playback even in critical listening environments. While the BT-Pro V2 is designed to last with a 14 gauge steel outer shell and high durability connectors and controls, it also has an enhanced reception range thanks to the plastic injection-melded insert, which allows wireless signals to pass through unimpeded. Balanced XLR outputs are provided for connection to pro audio equipment, with a level control to allow for easy volume adjustments, a headphone output for testing purposes, and a mono switch to reduce channel requirements when needed. 48V operation & unique device identifiers For ease of use in live sound applications, the BT-Pro can be powered via 48V phantom from the PA console. This provides the ability to use the included external power supply as a redundant backup, or to eliminate it from the setup altogether. Under 48V phantom power, the BT-Pro provides mic-level signals at the XLR outputs, but when the external power supply is used it is capable of generating line-level signals that can be connected to the line inputs of a PA console and avoid using additional mic-level channels. Each individual BT-Pro V2 also has a unique Bluetooth identifier, allowing multiple units to be successfully used in close proximity to one another. This makes it easy for commercial multi-room facilities to employ a number of BT-Pro units without any confusion when trying to connect to a receiver in a specific part of the building. Using the BT-Pro V2 in a presentation Standing at a podium, you can easily transmit the audio from your laptop presentation to the BT-Pro to play background music, audio clips or to mate with video. Simply connect directly to the PA speakers for amazing audio! Using the BT-Pro V2 with tablet for performance Use the BT-Pro V2 on stage to transmit performance or audio files from a laptop or tablet! Simply pair-up the BT-Pro V2 to your computer to freely move around the stage without wires. Wireless connection, professional audio The BT-Pro V2 makes it easy to quickly connect your iPhone to the PA without having to search through drawers looking for wires. The innovative antenna lets you sit the BT-Pro anywhere without interference. Connecting multiple BT-Pro in one location Each BT-Pro V2 has a unique identifier that shows up as a six digit numerical code in the Available Bluetooth Devices list on your mobile device (ex. BT-Pro-100001). Simply mark down this number in the room where the BT-Pro is installed to ensure that every time someone tries to wirelessly connect they will select the appropriate receiver. Features/Specs Wirelessly connect smartphones and tablets to a mixer Bluetooth reception of up to 30 meters (100ft) Dual balanced XLR outputs feed the PA system Powered via external supply or 48V phantom power Unique device ID allows multiple BT-Pro’s in a single location Level Used to set the overall output level at the XLR and headphone outputs. Mono Sums the stereo signal to Momo. When active, the red LED illuminates. Mono mode reduces the channel count on the PA or lets you send the signal to two separate audio system simultaneously. Headphone Mini 3.5mm (1/8") stereo TRS headphone output is used to check the output from the source for troubleshooting or queueing tracks. Pair Press and hold the Pair button for 3s to disconnect from any Bluetooth devices and force the BT-Pro into pairing mode. During playback, double-tap this button to remotely pause/resume playback on your source device. The Pair LED indicates the pairing and playback status of the BT-Pro. Power Input / USB Used to locally power the BT-Pro. Connect via USB-C cable to a computer or a power adaptor brick (included). This is a power input only and will not pass audio or other data. XLR Out Standard male XLR outputs provide balanced analogue audio at mic or line- level to feed a PA system. The BT-Pro can be powered remotely by providing 48V phantom power to these outputs. Ground Lift Used to eliminate hum and buzz caused by ground loops. Lifts pin-1 on both XLR outputs. Plastic Insert The BT-Pro V2 combines a 14 gauge steel protective outer shell with an injection-melded insert which allows wireless signals to pass through unimpeded, enhancing the effective wireless range of the device while ensuring it stands up to use on stage night after night. Audio circuit type : Active audio line driver Frequency response : 20Hz to 20KHz Dynamic range : 90dB Total harmonic distortion : 0.05% Output Impedance : 150Ω Signal to Noise : 90dB Bluetooth Compliance : Bluetooth 5.0 Data Compression : SBC Codec Mono Sum, Ground lift, Level Control, Headphone Input Connectors : Bluetooth 5.0, Device range up to 100' Output Connectors : XLR-M, 3.5mm TRS Headphone Extras : Included power supply General Construction : 14 gauge steel outer shell, melded nylon insert Finish : Durable powder coat Size (L x W x D) : 3.3” X 5” X 2” (84 x 127 x 51mm) Power : USB-C connector (Power Only) or 48V Phantom Conditions : For use in dry locations only between 5°C and 40°C We are authorized dealers for all these brands. Click a logo to see our listings. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost. Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES. We provide free shipping to the contiguous 48 United States, on most items. Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost. We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit. We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service. Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Please contact us for a Return Authorization before returning any items.

Price: 304.99 USD

Location: Winchester, Virginia

End Time: 2024-11-29T21:15:46.000Z

Shipping Cost: 0 USD