OEM JB-2 IMPCO Model J JB JB-2 Replacement Regulator Vaporizer LPG gas Forklift

Description: OEM JB-2 IMPCO Model J JB JB-2 Replacement Regulator Vaporizer LPG gas Forklift General: The JB-2 Regulator / Converter / Vaporizer is an LPG liquid withdrawal high pressure regulator. This regulator provides excellent fuel delivery with liquid-cooled engines up to 100 HP. For indoor applications by NFPA definition, a regulator is not considered a positive shut-off valve. An approved automatic shut-off device is required to be installed. This will shut off the fuel supply should the engine fail while unattended. Shut-off devices come in vacuum- or solenoid-actuated configurations. Operation: Liquid propane enters the regulator and then is vaporized using heat from the engine’s coolant. Tank pressure is reduced to approximately 1.5 psi. As negative pressure is transmitted from the carburetor to the regulator, the regulator releases propane vapor to the carburetor. Some regulators are equipped with a primer button. Correctly installed regulator should not require priming. If priming is required, a maximum duration of only 1 second should be used. Installation: JB-2 Regulator / Converter / Vaporizer should be mounted as close to the carburetor as possible, with the fuel outlet placed in the lowest position for best flow. Service: The JB-2 Regulator / Converter / Vaporizer should be periodically checked for leakage. If the unit requires service, we suggest you take it to a qualified service technician. FEATURES: Propane liquid withdrawal vaporizing regulator For liquid-cooled engines up to 100 HP deal for mobile industrial equipment applications Rated to 312 psi maximum inlet pressure Specifications Fuel Type LPG Liquid/Vapor Diaphragm Material Silicone Inlet Pressure, Maximum 312 psi (21.51 Bar) Inlet Pressure, Minimum 30 psi (207 kPa) Nominal Outlet Pressure, standard blue spring -1.5" w.c. (-0.37 kPa) HP/kW 100 HP (75 kW) Operating Temperature Range -40 to +250 degrees F (-40 to +121 degrees C) Fuel Filtration 40 micron Heating Chamber Source Required for liquid LPG Mounting Position Vertical recommended. Horizontal position can be used when fuel contamination can be controlled with HD-5 or HD-10 specified LPG fuel Applications Mobile, stationary, industrial, and automotive OEM JB-2 IMPCO Model J JB JB-2 Replacement Regulator Vaporizer LPG gas Forklift General: The JB-2 Regulator / Converter / Vaporizer is an LPG liquid withdrawal high pressure regulator. This regulator provides excellent fuel delivery with liquid-cooled engines up to 100 HP. For indoor applications by NFPA definition, a regulator is not considered a positive shut-off valve. An approved automatic shut-off device is required to be installed. This will shut off the fuel supply should the engine fail while unattended. Shut-off devices come in vacuum- or solenoid-actuated configurations. Operation: Liquid propane enters the regulator and then is vaporized using heat from the engine’s coolant. Tank pressure is reduced to approximately 1.5 psi. As negative pressure is transmitted from the carburetor to the regulator, the regulator releases propane vapor to the carburetor. Some regulators are equipped with a primer button. Correctly installed regulator should not require priming. If priming is required, a maximum duration of only 1 second should be uséd. Installation: JB-2 Regulator / Converter / Vaporizer should be mounted as close to the carburetor as possible, with the fuel outlet placed in the lowest position for best flow. Service: The JB-2 Regulator / Converter / Vaporizer should be periodically checked for leakage. If the unit requires service, we suggest you take it to a qualified service technician. FEATURES: Propane liquid withdrawal vaporizing regulator For liquid-cooled engines up to 100 HP deal for mobile industrial equipment applications Rated to 312 psi maximum inlet pressure Specifications Fuel TypeLPG Liquid/Vapor Diaphragm MaterialSilicone Inlet Pressure, Maximum312 psi (21.51 Bar) Inlet Pressure, Minimum30 psi (207 kPa) Nominal Outlet Pressure, standard blue spring-1.5" w.c. (-0.37 kPa) HP/kW100 HP (75 kW) Operating Temperature Range-40 to +250 degrees F (-40 to +121 degrees C) Fuel Filtration40 micron Heating Chamber SourceRequired for liquid LPG Mounting PositionVertical recommended. Horizontal position can be uséd when fuel contamination can be controlled with HD-5 or HD-10 specified LPG fuel ApplicationsMobile, stationary, industrial, and automotive × Buy now and save! Tell a friend Watch now Postage info Click the Postage tab above the listing description for more info Click the Postage tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like 47520-30412-71 Wheel cylinder toyota komatsu forklift IGNITION TUNE UP KIT NISSAN H20 OLD FORKLIFT SET POINT PRESION CLICK CAP J15 D11 MD195872 A218151 Piston ring set STD 4G64 engines caterpillar mitsubishi forklif CA55-576 Carburetor Mixer CA50 CA55 Impco Style Propane Conversion Forklift Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © D Mart Parts Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are accepted Items must be returned within 60 days of the auction ending Seller will pay for return shipping. eBay integration by

Price: 88.98 USD

Location: Keller, Texas

End Time: 2024-10-18T17:49:01.000Z

Shipping Cost: N/A USD