Description: Listing is for a single NDB7875 445nm laser module. Unit is upgraded with a high thermally conductive copper module for max cooling and stability. It is prewired with a 2.4A bucking laser driver and comes with a three element(Aixiz) glass lens. The unit is ready to be dropped into your final project. No setting current or soldering diode to driver. Just place in heatsink and connect leads to your power supply. Input voltage range is 6V-9V. Great for use with two Li-Ion's or Lipo's. Suggest two 16340/18350/18650 3.7V Li-Ion's or 3.2V Lipo's. You can also use a 6-8V 2A wall adapter or bench power supply. Here is what you get. The X-Drive is encased in the back of the model connected to the diode. Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering. Wire assignment is:Red +Black - Wavelength 445nm +/- 5nmInput Voltage 6V-8.4VDriver Output Current 2400mADriver Current Draw 1.7A +/- 0.5APower Output 2.2W-2.7WDriver Type Constant CurrentLens M9x0.5mm Threaded Three Element Glass LensReverse Polarity Protection YesDuty Cycle 120 seconds on 30 seconds off with proper heatsinking NDB7875 9mm 445nm Laser DiodeHere is a quick power test on this diode with a G-2 Lens *Disclamer* By purchasing these diodes you are agreeing to the following. - You are over 18 years of age . - You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product. - You will use these as components and properly incorporate them into a finished product. - You will use these diodes/modules in a safe and responsible manner and for a legal purpose. - You are legally responsible for the use of these components, improper use of these components or their end products. - You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products. - You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.
Price: 96 USD
Location: Saint Louis, Missouri
End Time: 2024-02-03T08:53:21.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: 10%
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
MPN: Does Not Apply
Brand: DTR's Laser Shop
UPC: Does not apply
