HS5157 Front Mount Hydraulic Steering Cylinder Seal Kit & Bleed Kit for Seastar

Description: New HS5157 Front Mount Hydraulic Steering Cylinder Seal Ki t& Bleed For Seastar Note: Blue and orange warehouses are shipped randomly. If you have special requirements for color, please contact us in advance. Fitment: Fits for front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 Basic Instructions: Attach bottle to helm reservoir (do not pierce bottle)(do not let bottle run empty) Connect bridge tube to bleed fittings on steering cylander and loosen/open fittings. Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm. Manually swing the outboard through full articulation to relieve trapped air and confirm good bleed. Note: Orientating bleed fittings up while pumping fluid with helm will allow air to escape cylinder. Repeat 3-4 as necessary until no air is visible in bridge tube. Tighten bleed fittings before removing bridge tube Using Instruction Loosening the Seal Gland. Turn the outboard hard to port; place the pin wrench in the holes of a gland. And use a 5⁄8-inch box wrench on the nut on the port end of the piston rod. (NOTE:Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland) Removing the Support Bracket. Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. (Do the same to the piston rod nut and washer. ) Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket. Use the pin wrench to remove the Old Seal Gland. Install the New Seal Gland. Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool; it is not part of the final assembly, but you will need it for the other side. Reinstall the Support Bracket. Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently. Tightening the New Seal Gland. Use the pin wrench to tighten the new seal gland while using a 5⁄8-inch box wrench on the starboard end of the piston rod for counter torque. Description: 1 Year Warranty 100% Brand New According to original factory specifications, perfect match to original car. Made of high quality material. Easy to install. Parts are from certified professional factory. We highly value the buyer shopping experience and aimed to provide quality parts.Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time, before opening return or case. Items Included: 1 x Bleed Kit For Seastar（HS5157） 1 Year Warranty NOTE: Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time, before opening return or case. Shipping Policy: We ship item within 24 hours after payment has been verified (Orders are not processed on holidays). All items will be shipped to buyer’s ebay address. Please make sure your receiving address is correct before your pay. Return Policy: If you need return, let us know the detailed problem and send us some pictures for confirmation. Then get a address for return or refund . Contact us: If you do have any questions or concerns, please feel free to contact via eBay's contact seller button. We will answer your email within 24 hours except Holidays, Saturday and Sunday. Feedback: If you are satisfied with the product you received, please feel free to leave us positive ( + ) feedback. Please contact us before you leave us a Neutral/Negative feedback, we will always try our best for 100% customer satisfaction.

Price: 34.39 USD

Location: Chino, California

End Time: 2023-09-09T07:44:37.000Z

Shipping Cost: 0 USD