Hobart 80 Qt M-802 Mixer With Stainless Steel Bowl and Paddle

Description: Hobart M-802 80qt Mixer. 3 phase 200 volt. 2hp. This mixer would normally be $8250 this mixer is marked down because it has a pitted Adjatator shaft and there is a metallic smell from the motor nothing wrong with the motor just residual from what was previously mixed with the machine. Great mixer for Someone looking for a good deal on a fully refurbished mixer. What was done in the refurbishing process.. Cosmetics Strip down and fill voids in the body. Epoxy primer Single stage MAE paint, painted in a licensed paint booth New decals Electrical New cord, plug, junction box, new motor starter (contactor, overload), new control panel with the new on/off and timer, new wires. Clutch and brake take apart inspect clutch disks replace if necessary lube moving parts Bowl lift transmission Disassemble inspect shim or replace any warn parts new bearing clean out old greese replace with new Bowl lift worm Take apart remove old grease replace bearing on top shaft, inspect brass nut replace if nessesary Gear box motor and planatary Blow out motor with air nozzle Replace all bearings except the 2 tapered Timken bearings inspect those replace if necessary. All new keys, new oil sight glass new oil in transmission. New food grade oil in the planatary. Inspect oil pumps new planatary seal. All the bearings in the critical areas will be a combination of quality SKF, MRC JAF, SMT, Nachi, Koyo. 3 non critical bearings such as the upper clutch, bowl lift transmission tension bearing and bowl lift worm bearing is chinese Comes with a used Stainless Steel Bowl see pics paddle . copy and paste this YouTube link to to see the refurbishing process https://youtu.be/o_F2d-f7Shs Tested and ready to work. Local pick up available Any questions Lance 608 213 5315 use this for the best deal YOU MUST SELECT THE CORRECT SHIPPING ADDRESS AT CHECK OUT I WILL ONLY SHIP TO THE ADDRESS THAT PAYPAL AND EBAY SUPPLY ME. If the wrong address if selected the only way to fix it is to cancel the transaction and start over. Freight Shipping Information This item will be coming via freight truck. Before I ship your item, there are some things you need to know. Sometimes trucking companies are difficult to deal with and end up costing me and you more money.Questions I will ask you:*Do you have a dock? A dock is defined as a platform that a 53 truck can back up to and be at the correct height to roll off the item with a pallet jack. *Do you have a forklift? A forklift must be able to lift the item off the truck, keep in mind your item could range from 400-2500 pounds. You must also be able to unload your item in a timely manner, meaning you need to be prepared at the time of delivery to unload your item.*Do you need liftgate service? If you do not have a dock or forklift a liftgate service can be arranged for an additional charge. * Do you need inside delivery? The above services are curbside only. If you need a driver to bring you item inside for you this needs to arranged at the time freight is set up. Drivers do not want to do any extra work for you. Sometimes if the driver can roll right off the truck and into your space that is usually no problem. But if things are more difficult of a delivery the driver will not work hard to deliver your item. Some locations are limited access. These include churches, schools, construction sites, storage facilities, farms or ranches, government facilities or strip malls. These types of locations need to be stated up front as they may cost an additional fee. Once freight is established and item has been picked up from me you will be provided with the tracking information. Trucking companies usually have a target date to deliver, but this date is never set in stone. It can change daily. It will be your responsibility to check your tracking and even call the trucking company to get a better idea. If you are not at your location when the item comes for delivery it will cost you more money for another delivery. It is best to know everything up front when scheduling a shipment. It will make my and your life much easier when the shipment comes for delivery. This is also the best way to avoid any additional fees that may be assessed upon delivery. Instructions at the time of deliveryAt the time of delivery, it is your responsibility to inspect the item for any damage that may have occurred during shipping.*If the item is damaged, you need to take several pictures and note it on the shipping documents. If you sign for the item and it is damaged and you do not note it on the bol you are taking the item as is. At this point, there is nothing I can do for you in terms of insurance, refund, credit. It is your responsibility to note any damage. If there is damage, you note it and want to keep the item and then deal with an insurance claim that is possible too, just be aware that it can take weeks/months to get reimbursed from insurance companies. *If the item is heavily damaged, you have the option to refuse the shipment. In that case, once I get the item back I will reimburse you your payment. *If you refuse a shipment for any other reason there will be a redelivery fee that can be more than half of the original shipping cost. You will be responsible for this additional fee. I will not allow the shipment to be redelivered unless I have received the payment for redelivery. *Bottom line is being there and be ready to receive your shipment

Price: 6500 USD

Location: Madison, Wisconsin

End Time: 2024-09-05T22:37:28.000Z

Shipping Cost: N/A USD