HILTI HIT-RE 500 V3 EPOXY ANCHOR 11.1 fl oz (16.4 oz) #2123401 (EXP 5/31/2025)

Description: HILTI HIT-RE 500 V3 EPOXY ANCHOR 11.1 fl oz (16.4 oz) #2123401 (EXP 5/31/25)New - open box, unused. Expires May 31 2025. Please make sure your shipping address is correct before ordering. Thanks for looking! Ultimate-performance injectable epoxy mortar with approvals for rebar connections and heavy-duty anchoring Base materials: Concrete (cracked), Concrete (uncracked)Approvals / Test reports: Fire, ICC-ES report (concrete), SeismicIBC compliance: IBC 2015, IBC 2018 Features & Applications Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Features High performance and technical superiority as per international approvals Suitable for diamond-cored holes – when prepared using the TE-YRT roughening tool Injectable epoxy suitable for all-year use – cures at temperatures down to -5°C / 23°F Longer working time – allows greater flexibility during installation Suitable for water-filled holes and underwater applications (depending on rod specification and approvals) Applications Structural connections with post-installed rebar (e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.) Structural renovation of buildings, bridges and other civil structures, retrofitting and re-strengthening of concrete members possible Anchoring structural steel connections (e.g. steel columns, beams, etc.) Fastenings requiring seismic qualification Fastening in natural stone and wood, including GLT and CLT made by spruce, pine or fir. Base materials Concrete (cracked), Concrete (uncracked) Approvals / Test reports Fire, ICC-ES report (concrete), Seismic IBC compliance IBC 2015, IBC 2018 Seismic loading Yes PROFIS Software Yes Clean-Tec No Anchoring elements HIS-N internally threaded sleeves, HIT-V threaded rods, Rebar Cleaning procedures Automatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Manual Cleaning Storage and transportation temperature range 41 - 77 °F In-service temperature – range -40 - 158 °F Shelf life from date of manufacture (at 73°F/23°C and 50% relative humidity) 12 months Product information This product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions: Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes: rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin: wash with plenty of soap and water. Disposal: Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.

Price: 50 USD

Location: Prairieville, Louisiana

End Time: 2024-11-13T23:58:28.000Z

Shipping Cost: 0 USD