Description: This is a wire harness for the electric power assisted steering (EPAS) racks (not pumps) used in various 2011 and up Ford cars and trucks. This harness uses factory connectors sourced from the factory suppliers. The wire is automotive-grade cross-linked polyethylene insulated wire rated for under hood use. The smaller wires are type GXL and the larger wire are type SGX. The harness comes with 6 feet of wire. All wire connections are crimped. All crimps are verified to meet USCAR standards for tensile strength. All our products are assembled by hand in the United States. Watch out for other companies selling harnesses made from cheap aftermarket connectors. These cheap kits often don't use the correct seals or wire terminals. The main power connector has 6 feet of 6-gauge, red and black SAE J1127 SGX wire. The OEM Ford harness we based this harness on has 6-gauge wire on the positive side and 8-gauge wire on the negative. See photos for a comparison of the OEM harness and our harness. The smaller data connector comes with 6 feet of color-coded 18-gauge wire. The three wires are light blue with a dark blue stripe, green with a yellow stripe, and white with an orange stripe. These match the OEM connector we based this harness on. See photos for a comparison of the OEM harness and our harness. The two CAN BUS wires are twisted together the same as the OEM harness. This kit can be used to replace damaged wiring in factory Ford vehicles. Please check out the example picture of the OEM rack and the connectors on the rack to make sure this will fit. Custom harnesses (length, wire color) can be made. Message me for prices and lead times. Custom harnesses are not returnable. This kit can also be used to install an EPAS rack in early S197 Mustangs that did not get the electric power assisted steering rack from the factory. The EPAS rack is a popular swap part for the earlier S197 Mustangs because it eliminates the need for a power steering pump when swapping in a later Coyote motor. With this kit you aren't limited to the factory replacement loom. If you need a rack controller for use in an earlier model, please see below. We are a vendor for the Modular Motorsports Racing controller. Please note that this is a universal kit for the Ford electric power assisted steering rack using factory-sized wiring. It is assumed that the purchaser and installer are familiar with automotive wiring and will follow standard industry practices. If you need a universal EPAS rack CAN simulator to activate your rack in a custom installation, please see my other ad: https://www.ebay.com/itm/266124818011 If you prefer to buy just the connectors and the wire terminals, please see my other ad: https://www.ebay.com/itm/264679614347 See a video on how to assemble and disassemble the two connectors here: https://www.youtube.com/watch?v=9z16DVLmarI If you are looking for a steering connector and you don't see it, feel free to message me.
Price: 71.99 USD
Location: Austin, Texas
End Time: 2024-02-03T00:17:14.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Fitment Type: Performance/Custom
Items Included: Wire Harness
Manufacturer Part Number: Does Not Apply
Greasable or Sealed: Sealed
Drive Type: Electrical
Placement on Vehicle: Universal
California Prop 65 Warning: WARNING: This product contains a chemical known to the State of California to cause cancer.
Brand: Select Electrical Connectors
Type: Power Steering Wire Harness
OE/OEM Part Number: NA
Features: Sealed
Country/Region of Manufacture: United States
Universal Fitment: Yes
Performance Part: Yes
Part Type: P/S Control Module Connector
