Edge Pro Diamond PDTools Stone - Fits Edge Pro, Hapstone, TSProf, Ruixin (F650).

Description: F650 (28/20μ) 25mm: PDTools, DIAMOND-stone Apex Edge Pro Ruixin TSPROF Ganzo. Normal 0 false false false EN-US X-NONE X-NONE Attention:Diamond & CBN-stones from Ukraine have some difficulties:*****Since the PDTools (UKRAINE) factory is experiencing difficulties of war, the plant reserves the right not to paint aluminum backing plates for sharpening stones, so some sharpening stones from Ukraine may not be painted and may be differ from the photos, but HOWEVER THIS DOES NOT AFFECT THE PERFORMANCE CHARACTERISTICS OF THEM OF ABRASIVE MATERIAL inside THE SHARPENING STONES!Attention:The guarantee of the factory products from Poltava city PDTools (UKRAINE) is their gluing on a 4 mm backing plates in the factory way - for other sharpening bars, glued on a 3 mm backing plates (Hapstone, Gritomatic etc.), the factory DOES NOT BEAR RESPONSIBILITY AND DOES NOT GIVE a factory guarantee for those sharpening stones: Attention: Warning: PDTools trademark on the back of the aluminum's backing blanks 5/32” = 4 mm (See Attached picture from their booklet) high, can guarantee that you have purchased the PJSC Poltava Diamond Tools Superabrasives factory’s product for the American market from the Authorized dealer in North America (See Attached photo of our certificate)!*******https://www.youtube.com/watch?v=jAk0VASJx0k*******https://www.youtube.com/watch?v=qtsX5jxz6g8*******https://www.youtube.com/watch?v=3g3pABq_tjM (Explained: the differences between CBN metallic and Diamond resin)*******https://www.youtube.com/watch?v=B3M8Xn-FXiA&t=5s*******FeedBaсk*******We Are Selling an Original Product (Guys, Beware of Scammers! https://www.youtube.com/watch?v=r63OK8DQyCg) Because Of We Are the Official Dealer of the PDT-Factory, Ukraine in North and South America (See Attached Photos). Polyamide OSB - unique modified binder (organic resin). Tips:Question from: marbalie-0 (148) Are these stones resin bonded or electroplated? Not really seeing specifics.Answer: These stones are bonded by organic resin - Polyamide OSB FeedBaсkFrom the previous Buyer from the USA: reno_raines99_5 (84) US $ 515.00 I've had these for a week now and they are the best diamond stones I have tried. They are expensive and may not be for everyone but if you are someone who does a lot of sharpening and doesn't want to keep replacing the diamond stones or just wants the best product then this is for you.The EXPERT Set / 25mm – CBN sharpen/honing stone Edge Pro Ruixin TSPROF Hapstone (#175387035682) F 650 grit (28/20 μm) DIAMOND sharpening/honing stones 150-25-7-3 to Edge Pro Ruixin TSPROF Hapstone (see on 2:09 minutes on video: https://youtu.be/RAy8olk8cMo)About this item:· 650 Grit – U.S. Standard ANSI· DIAMOND sharpening stones, Poltava, working surface: · 5 29/32" x 63/64" x 1/8"· (150 x 25 x 3 mm) · Length: 150 mm = 5.91 inches · Width: 25 mm = 0.98 inches · Thickness: 3 mm = 0.12 inches · REMEMBER – It was mounted to aluminum plate: 160 x 25 x 4 mm · Material: DIAMOND. It has the best cost/productivity ratio for processing of STEEL, comparing to cheaper stones. DIAMOND stones are similar in qualities to Japanese whetstones but have had ten times longer working life. · DIAMOND can be used without lubricants· Compatible with Edge Pro, RUIXIN, TSPROF, Hapstone etc.· Durable Polyamide OSB - unique modified binder (organic resin) - bonding! Created by PDTools plant, UKRAINA· Working surface: 150 x 25 x 3 mm (5 29/32" x 63/64" x 1/8"), mounted on 4 mm aluminum blank· Sharpening stones overall dimensions (with aluminum blank): 160 x 25 x 7 mm (6 19/64" x 63/64" x 9/32")Attention:Warning: PDTools trademarks on the back of the 5/32” = 4 mm (!) Hight aluminum blank can guarantee that you have purchased a PJSC Poltava Diamond Tools Super abrasives factory’s product for the American market from an authorized dealer in North America (See the photo) ! *************FeedBaсkFrom the previous Buyer from the USA: sim_js_hnori2 (26) US $ 515.00 Hello there, I have had a chance to use the stones on 2 knives. I must say they really do very well compared to my cheaper TSPROF diamond stones or my synthetics. They cut fast, leave a decent scratch pattern and bring up an apex quickly! Five stars are not nearly enough! Super seller! Would highly, highly recommend. Seller went out of their way to exceed expectations. This is how it's supposed to be!The EXPERT Set / 25mm – CBN sharpen/honing stone Edge Pro Ruixin TSPROF Hapstone (#175387035682)From the previous Buyer from Israel: o0o3bo0od-34 (2) US $49.32 Great find, excellent quality and professional finishing.5/3μ (F 4,000) 25mm - DIAMOND sharpen/honing stone Edge Pro Ruixin TSPROF Hapstone (#175335029704)FeedBaсkFrom the previous Buyer from the USA: 815vladimir (858) US $79.20 All perfect. Thank you very much!14/10μ(F 1,500)25mm-DIAMOND sharpen/honing stone Edge Pro Ruixin TSPROF Hapstone (#325236057831) To be, or not to be, that is the question:BY WILLIAM SHAKESPEARE(From Hamlet, spoken by Hamlet)Do you wanna “to be, or not to be” on the Top Level? Do you wanna “to be, or not to be” on the Supreme Union?Do you wanna “to be, or not to be” the BEST?If you wanna TO BE, WE ARE INTRODUCING TO YOU - what do you WANT: THE NEW ERA ON the sharpening’s community coming, and IT IS COMING NOW - Poltava Diamond Tools factory, UKRAINE NOW IN THE USA! 👑We Are an Official Representative PJSC PDT® (Ukraine) in the USA👑THE OFFICIAL PRODUCT FROM PJSC PDT® IN SOUTH AND NORTH AMERICA👑 Lifetime Bonded Clutch Warranty from PJSC PDT® 👑 So,Put aside your Arkansas stones - let them "rest",Put your Naniwa’s stone into some water before it starts to work - let them "drown" in the water & "suck" something,Give your Boraide’s sharpening stones away to your friends - let them "remember” you...AndGO TO MOVE ON DIAMOND from PDTools THAT GIVE YOU OPPORTUNITY:v No fear of getting cancer - no phenol-formaldehyde bonds, only the Polyamide OSB - unique modified binder (organic resin).v No parasitic scratches on the cutting edge on your knives natural diamond did.v No water or oil as lubricants, and, as a result, no dirt on the worktable when you will be sharpening your knives – DIAMOND works dry.v There is no need to prepare the sharpening stones for work - just "take it" and "work with".v No headaches with the return of goods - send to the factory a passport with the serial number on the sharpening bar and receive a new sharpening stone without complain (in the absence of signs of strong mechanical impact or deliberate damage).v Lifetime factory warranty until the grinding mass disappears in the stone (it is 1,5 mm)v So, ARE YOU “IN’ or “OUT”?v DescriptionDIAMOND Sharpening Stones are used for sharpening knives using Edge Pro, Ruixin, Hapstone, TSPROF etc. sharpeners. DIAMOND is the hardest material IN THE WORLD. Polyamide OSB - unique modified binder (organic resin) alloy bonding for high endurance and low wearing rate.DIAMOND Stones consists of a 3,0 mm diamond plate mounted on a 4,0 mm a high-quality aluminum blank and painted.DIAMOND qualities include high levels of high hardness, strength, abrasion resistance, and thermal and chemical resistance. DIAMOND offers excellent performance in sharpening knives of any steel. Due to its high resistance specs, DIAMOND can be used dry without lubricant. This makes DIAMOND the cleanest of the available sharpening stones. How to useDIAMOND can be used without lubricants.DIAMOND stones may have tone imperfections. DIAMOND may become darker over time due to the natural resin oxidizing, BUT it does not affect the sharpening.DIAMOND stones do not require any preparations.Q & A· DIAMOND sounds like a wonderful abrasive that is far better than anything else on the market. So, what's the catch?DIAMONDS provides high performance, sharpens any steel, has low wear rate and low stress, does not create mess, and does not leave unwanted grooves. The price tag is expensive. However, remember that knives guaranteed by the manufacturer that you will be sharpening MUCH EFFECTIVELY!· Can I sharpen ceramic knives with DIAMOND?Theoretically, yes. However, sharpening ceramic knives is technically difficult and uneconomical in most cases. DIAMOND stones can cause microchipping when used on ceramics. Consider purchasing a new ceramic knife instead of sharpening it. · What is PDTools means, it printed on the sharpening blanks?The PDTools, Ukraina is an abbreviation for the name of the "Poltava Diamond Tools" plant in Ukraine - the manufacturer of these sharpening blanks made from diamonds and CBN: https://youtu.be/lOcRcQfGYMk . Please, note that if there are any problems with your order, contact us first via eBay giving full details of any problem along with your user ID - Before leaving any Negative or Neutral feedback please reach out to us, we will resolve the issue as quickly as possible :-). Grit Micron Purpose 📈80 grit 200/165 μm Optional/Alternative 📈160 grit 125/100 μm 🔢Recommended as #1 📈320 grit 60/40 μm Optional/Alternative 📈460 grit 40/28 μm 🔢Recommended as #2 📈650 grit 28/20 μm Optional/Alternative 📈1500 grit 14/10 μm 🔢Recommended as #3 📈3000 grit 7/5 μm Optional/Alternative 📈4000 grit 5/3 μm 🔢Recommended as #4 📈5000 grit 3/2 μm Optional/Alternative 📈10000 grit 2/1 μm 🔢Recommended as #5 📈15000 grit 1/0 μm Optional/Alternative

Price: 120 USD

Location: Tarzana, California

End Time: 2024-08-10T21:22:56.000Z

Shipping Cost: 4.63 USD