Description: Dry Tec 68% Calcium Hypochlorite Granular Swimming Pool Shock - Choose Quantity Our Dry Tec 68% Calcium Hypochlorite formula works similarly to Sock-It, however, Dry Tec does not run the risk of bleaching vinyl pool liners. This allows for the shock to be evenly broadcast over your pool's surface. Note: DO NOT MIX! 1 bag (1-pound each) Fast-Acting Quick-Dissolving Swimming Pool Sanitizer Kills bacteria, controls algae and destroys organic contaminants in pools 68% calcium hypochlorite Recommended Dosage: 1 pound per 10,000 gallons of water HOW TO USE: Use entire contents of the bag when opened. If any granules settle to the bottom of the pool use brush to disperse. Add the recommended dosage of this product during evening hours while the filter pump is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. If any granules settle to the bottom of the pool use brush to disperse. WATER BALANCE: For best product performance, swimmer comfort, and crystal clear water: Maintain pH in the range of 7.2 to 7.6. Maintain total alkalinity in the range of 60 to 120 parts per million (ppm). Maintain calcium hardness above 200 ppm. Use a reliable test kit that measures all these ranges. Use our pool care products to make adjustments. Follow label directions for each product. Do not enter the pool until the free available chlorine residual is 1-4 ppm for each of the below noted water treatment applications. OPENING YOUR POOL: For best results, see the “WATER BALANCE” section above before treatment. Always adjust and maintain pH in the 7.2 to 7.6 range. Follow “SHOCK TREATMENT” directions on this package. Allow 30 minutes for the product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed. ROUTINE CHLORINATION: For best results, see the “WATER BALANCE” section above before treatment. Throughout the pool season, adjust and maintain pH at 7.2 to 7.6. check available chlorine with a suitable test kit. SHOCK TREATMENT/SUPERCHLORINATION: For best results, see “WATER BALANCE” and “HOW TO USE” section above before treatment. Every 7 days, or as necessary to prevent pool problems, shock treat/superchlorinate the pool by adding one bag of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems that are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit. STORAGE AND DISPOSAL: Keep this product dry in its tightly closed container when not in use. Store in a cool, dry, well-ventilated area. Keep away from heat or open flame. Nonrefillable container. Do not reuse or refill this container. Rinse empty container thoroughly with water to dissolve all material prior to disposal. Offer for recycling if available. Do not contaminate food or feed by storage or disposal or cleaning of equipment.
Price: 17.95 USD
Location: Tonawanda, New York
End Time: 2023-12-17T11:56:44.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Dry-Tec
Type: Pool Shock
Test/Treatment Parameter: Algae, Bacteria, Chlorine
EPA Registration Number: 1258-427
Form: Granule
Items Included: Full Instructions
Water Type: Fresh
Model: Dry Tec Shock
Product: Water Treatment
Suitable For: Swimming Pools
Available Variations
Color: 1 Pack
Price: 17.95 USD
Available Quantity: 157
Quantity Sold: 117
Color: 12 Pack
Price: 57.96 USD
Available Quantity: 245
Quantity Sold: 205
Color: 24 Pack
Price: 114.96 USD
Available Quantity: 476
Quantity Sold: 436