Description: This is a new Cast Iron Square Brake Master Cylinder with Bleeders and a new Brass Disc / Drum Proportioning Valve with Left (Driver) Side Mounting Bracket for vehicles with Disc Brakes in front and Drum Brakes in rear. Features:Cast Iron 1" Bore Master Cylinder with BleedersBrass Disc/Drum Proportioning Valve with Left (Driver) Side Mounting BracketHard Lines to connect Proportioning Valve to Master Cylinder The proportioning / combination valve has a zinc finish and performs the following valving functions:Proportioning: As more force is applied to the brakes and the car begins to lean forward, less braking force is needed in the rear. This valve decreases the pressure to the rear, preventing lock up.Metering: Metering is used in the front disk brake portion in the disc/drum system to delay application of the front discs allowing the slower reacting drum brakes to catch up. This provides rear stability on wet surfaces and helps prevent front pad wear. There is no metering function with the disc/disc setup.Residual Pressure: Drum Brakes require residual pressure of 10 lbs. to be held in the line. This pressure keeps the brake shoes close to the drums giving you a more firm pedal feel. The disc/disc setup does not require this pressure.System Failure Switch: This valve has a system failure switch that will alert you when half of your braking system is not working properly.
Price: 92.77 USD
Location: Cedar Falls, Iowa
End Time: 2024-10-01T02:36:00.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: GH
Type: Master Cylinder
Material: Cast Iron
Vintage Part: No
Finish: Anodized
Performance Part: Yes
California Prop 65 Warning: True
