BRAND NEW Crestron AV4, Crestron Processor

Description: Part is brand new, unopened. Qty 2 in stock. Will not ship outside of USA. AV44-Series™ Control SystemA rack-mountable control system with a powerful 4‑Series™ control engine, expanded memory, numerous integrated control ports and optional control card expansion slots. Features an isolated control subnet that provides a Gigabit Ethernet LAN dedicated to Crestron® devices. Control EngineCrestron® 4-Series™; real-time, preemptive multi-threaded/multitasking kernel; supports up to 10 simultaneously running programs; native .AV Framework™ software programCommunicationsEthernet100/1000 Mbps, auto‑switching, auto‑negotiating, auto‑discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SNTP, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1xX, SNMP, BACnet and IP1, IPv4 or IPv6, Active Directory® service authentication, HTTPS web server, HTTPS web browser setup and XiO Cloud® client, SMTP email clientControl Subnet100/1000 Mbps Ethernet, auto‑switching, auto‑negotiating, auto‑discovery, full/half duplex, DHCP server, DNS server, port forwarding, isolation mode, IEEE 802.3at Type 1 compliant PoE PSECresnet® NetworkCresnet master modeUSBSupports USB mass storage class devices via the rear panel USB 2.0 host port, supports computer console via the front panel USB 2.0 device portRS-232/422/485For 2-way device control and monitoring, COM port supports RS‑232 up to 115.2k baud with software handshaking, one port also supports RS‑422 or RS‑485 and hardware handshakingIR/SerialSupports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0–5V) up to 115.2k baudMemorySDRAM2 GBFlash8 GBMemory CardSupports SD and SDHC cards up to 32 GBExternal StorageSupports USB mass storage devices up to 1 TBConnectors and Card SlotsS1–S3(3) control card expansion slots;Requires CAGE3 accessory (sold separately)COM 1–2(2) 5-pin 3.5 mm detachable terminal blocks;Bidirectional RS-232/422/485 port;Up to 115.2k baud; hardware and software handshaking supportCOM 3–6(4) 3-pin 3.5 mm detachable terminal blocks;Bidirectional RS-232 ports;Up to 115.2k baud; software handshaking supportIR - SERIAL OUTPUT 1–8(2) 8-pin 3.5 mm detachable terminal blocks;Comprises (8) IR output ports;IR output up to 1.2 MHz;1-way serial TTL/RS-232 (0–5V) up to 115.2k baudIRP2 IR emitters sold separatelyRELAY OUTPUT 1–8(2) 8-pin 3.5 mm detachable terminal blocks;Comprises (8) normally open, isolated relays;Rated 1A, 30VAC/VDC;MOV arc suppression across contactsPoE+ INPUT POWER(1) Combo D-Sub 7w2 connector, male;54VDC power input for PoE+ power supply;Enables PoE+ power sourcing on the CONTROL SUBNET portsCONTROL SUBNET(4) 8‑pin RJ-45 connectors, female;100BASE-TX/1000BASE-T Ethernet port;PoE+ PSE (Power Sourcing Equipment) port;Provides a dedicated local network for Crestron devicesLAN(1) 8-pin RJ45 connector, female;100BASE-TX/1000BASE-T Ethernet portUSB(1) USB Type A connector, female;USB 2.0 port for storage devicesMEMORY(1) SD memory card slot;Accepts one SD or SDHC card up to 32 GB for storage of log filesI/O 1–8(1) 9-pin 3.5 mm detachable terminal block;Comprises (8) Versiport digital input/output or analog input ports (referenced to GND);Digital Input: Rated for 0–24VDC, input impedance 20k Ω, logic threshold >3.125V low/0 and <1.875V high/1;Digital Output: 250 mA sink from maximum 24VDC, catch diodes for use with real world loads;Analog Input: Rated for 0–10VDC, protected to 24VDC maximum, input impedance 21k Ω with pull-up resistor disabled;Programmable 5 V, 2k Ω pull-up resistor per pinNET(1) 4-pin 3.5 mm detachable terminal block;Cresnet master port;Outputs power to Cresnet devices;Alternately functions as a Cresnet power input to power the unit from a Cresnet power supply;See "Power" section for additional specifications100–240V~ 2.4A 50/60Hz(1) IEC 60320 C14 main power inlet;Mates with removable power cordG(1) 6-32 screw;Chassis ground lugCOMPUTER (front)(1) USB Type B connector, female;USB 2.0 computer console port;For setup onlyControls and IndicatorsPWR(1) Bicolor Green/Amber LED, indicates operating power is present;Amber indicates that the device is booting and is not yet ready to operate;Green indicates that the device is ready to operateNET(1) Amber LED, indicates communication with Cresnet devicesMSG(1) Red LED, indicates control processor has generated an error messageHW-R(1) Recessed push button for hardware resetSW-R(1) Recessed push button for software resetCNPS FAULT(1) Red LED and (1) push button;LED indicates an excessive Cresnet load detected at the NET port;Push button resets the fault indicationSLOT 1–3(3) Green LEDs, indicate control cards are inserted in the corresponding slotsLAN (rear)(1) Bicolor green/amber and (1) Amber LEDs;Green/amber LED indicates Ethernet link status and connection speed;Amber LED indicates Ethernet activityCONTROL SUBNET (rear)(1) Bicolor green/amber and (1) Amber LEDs;Green/amber LED indicates Ethernet link status and connection speed;Amber LED indicates Ethernet activityPowerMain Power2.4A @ 100-240VAC, 50/60HzAvailable Cresnet Power75W (3.125A @ 24VDC)Power over Ethernet Plus (PoE+)IEEE 802.3at compliant PoE+ PSE (Power Sourcing Equipment);120W total power;Each CONTROL SUBNET port supplies up to 30W to power one PoE+ (Class 4) PD (Powered Device)EnvironmentalTemperature41 to 104°F (5 to 40°C)Humidity10% to 90% RH (noncondensing)Heat Dissipation43 BTU/hrEnclosureChassisMetal, black finish, vented top and sidesFaceplateExtruded metal, black finish, polycarbonate label overlayMountingFreestanding or 2 RU 19-in. rack-mountable (adhesive feet and rack ears included)DimensionsHeight3.47 in. (89 mm) without feetWidth17.28 in. (439 mm);19.00 in. (483 mm) with rack earsDepth10.11 in. (257 mm)Weight10.36 lb (4.7 kg)

Price: 3900 USD

Location: Indio, California

End Time: 2024-11-22T23:14:07.000Z

Shipping Cost: N/A USD