AQUATEC ERP 1000 PERMEATE PUMP ERP1000

Description: YOUR SHIPMENT INCLUDES: ONE (1) NEW, RECENTLY MANUFACTURED AQUATEC ERP 1000 PERMEATE PUMP With 1/4" JG INSERTS MOUNTING HARDWARE INCLUDING CLIP AND SCREWS WARRANTY AND INSTALLATION INSTRUCTIONS ARE BELOW Get It Fast!! Get a Tracking Number!! For Only $57.00 More, Select USPS Priority Mail at Checkout and Receive Your Item in 2-3 Days and Get a Tracking Number and Up to $50 Insurance Protection.NOTE: USPS does not offer tracking numbers for First Class shipping.WARNING: Domestic USPS packages are not insured unless Priority Mail or Express shipping are purchased. Don’t pay more for less! We ship sooner, faster, and for less than our competitors. We ship immediately. We charge you less than our competitors charge you for slower service. We combine shipping upon request. We will match all verified competitor's prices. We ship internationally. Service makes the difference! BETTER PUMPS BETTER LIVING FEATURES AND BENEFITS Requires no electricity, powered by energy from brine water Improves recovery rates by as much as 400% Reduces waste water by as much as 80% Enhances contaminant rejection Ideal for membranes rated from 10-100 GPD Effective for inlet water pressure as low as 30 psi Increases membrane life, lowers “TDS creep” Fills product tank up to 4 times more rapidly NSF approved (Standard 58) One-year manufacturer’s warranty: Full warranty statement at Aquatec.com Aquatec’s Permeate Pump is a simple, yet revolutionary, device. Powered only by the hydraulic energy of brine water usually lost to the drain (i.e. no electricity required), the Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. These pumps dramatically improve the efficiency of R.O. water production, reducing wastewater by up to 80%. In other words, if your current system requires 10 gallons of tap water to produce a gallon of pure water (10:1), adding a Permeate Pump should reduce this ratio below 3:1. Permeate Pumps can also bring storage tanks up to line pressure and then shut the system down when these tanks reach capacity, eliminating the need for a hydraulic shut-off valve. Other benefits include higher delivery pressures, faster R.O. water production, superior water quality, and extended filter/membrane life. Our newest Permeate Pump (ERP 500) is specifically designed for residential applications (less than 50 GPD) where overall system noise is a key concern. The ERP 500 includes a specially designed insert which helps the system operate in near silence, eliminating the occasional clicking or gurgling sounds that can otherwise occur. Both the ERP1000 and the ERP500 can easily be retrofitted to upgrade existing R.O. systems. Installation Instructions: Aquatec.com Q. Can a permeate pump and a boost pump be used together on an R.O. system? A. Yes. Q. How can a Permeate Pump be retrofitted into an existing system? A. Go to Aquatec.com Q. What maximum production membrane can be used with the ERP 1000? ERP 500? A. ERP 1000 will handle permeate production of 100 gallons per day. The quieter model, ERP 500, is capable of handling 50 GPD membranes. Q. My holding tank will not develop enough pressure to supply remote locations. A. A Permeate Pump allows more water to be forced into the air bladder holding tank, thereby creating higher pressures, providing an automatic shut off valve (ASV) has not stopped the flow of feed water. See IMI 106 at Aquatec.com for description. Q. My permeate pump is not working, because I cannot hear it clicking? A. First, determine it is not working by removing the tube connection to the holding tank. If permeate is not being ejected from the permeate out port, then check to see if permeate water is being produced by removing the tube connection from the membrane. Finally, remove the brine connection to see if brine water is being supplied to the pump. Q. Is an Automatic Shut-off Valve required? A. No. But we recommend using a high volume shut off valve with our Permeate Pumps to avoid “TDS creep” during startup each time a small quantity of water is produced. AQUATEC PERMEATE PUMP W/ 1/4" JG INSERTS FOR USE W/ 50 GPD MEMBRANES (PAM500) AQUATEC PERMEATE PUMP W/ 1/4" JG INSERTS FOR USE W/ 100 GPD MEMBRANES (PAM1000) Copyright, 2009-2024; Discounted Water Filters, Inc, peponlinesales, and all affiliates; All Rights Reserved.

Price: 75.79 USD

Location: Peoria, Illinois

End Time: 2024-08-09T17:42:30.000Z

Shipping Cost: 0 USD