ANYCUBIC Wash & Cure 3/Plus/Max Machine & Washing Container Accessories lot

Description: ANYCUBIC Wash and Cure 3 Larger Size for Upgraded Capacity Compared to Anycubic Wash & Cure 2.0, the Anycubic Wash & Cure 3 has an impressive 100% increase in cleaning basket capacity, now at 3 liters. The total volume of the cleaning bucket has been expanded to 4 liters. This makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less.The curing size has increased by 15%, up to 160*180 millimeters, to accommodate larger and more models for single post-processing session. Localized Strengthening, Uniform Curing The "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments. By adopting a brand new arrangement of light beads and lens light source, Anycubic Wash & Cure 3's curing uniformity has been enhanced by 20% compared to its predecessor 2.0. This results in a more thorough and comprehensive curing of the entire model. Dual-layer Design, IPA Saving The double-layered PP material cleaning basket is designed to support simultaneous cleaning with the platform. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design maximizes the efficiency of IPA usage. Simple Operation, Quiet and Efficient Cleaning and curing dual modes, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Infinite rotary knob control, adjustable from 1 to 30 minutes at will. Through a more sealed structural design and software optimization, the noise interference generated during cleaning and curing is reduced[1], creating a quieter and more comfortable working environment. [1] Measured by Anycubic Laboratory the maximum sound < 65dB in the operating state of the machine. Models Display In The Box ANYCUBIC Wash and Cure 3 Plus Partial Enhanced The innovative Flexicure gooseneck lights design increases the energy value by 30,000uW/cm² in the 1~3cm irradiation range, which greatly enhances the curing effect on details such as the top of the model and the figure's skirt. Overall Curing Adopting a brand-new arrangement of lamb beads combined with a lens light source, it offers a 20% improvement in curing uniformity compared to wash&cure plus, thus 3d models can achieve better quality and consistency after curing. ANYCUBIC Wash and Cure Max Larger Size, Higher Compatibility Anycubic Wash & Cure Max can hold up to 14.9 liters (15.7 quarts.), surpassing the sizes of most wash and cure machines in the market. The impressive maximum cleaning size of 300*165*300mm (11.8"x6.5"x11.8"), is compatible with almost every consumer-grade resin 3D printer measuring 13.6"(35 cm) and below available on the market. Powerful and Alcohol-Efficient The adoption of two brand-new modes of spray rinsing and detail dipping ensures efficient and thorough cleaning. Powerful mechanical injection eliminates residual resin on the 3d print surface, while the bottom dipping rinse effectively removes resin from intricate details. Saving Isopropyl Alcohol 4 liters (4.2 quarts.) of isopropyl alcohol is enough to clean large-sized models (10"/25 cm and up), saving over 50% compared to 8.5 liters (9 qts.) required by traditional washing and curing machines. Alcohol-Efficient Moreover, one 5-liter (5.3 quarts.) bucket of isopropyl alcohol can clean up to 20 models (10"/25 cm and up), minimizing alcohol loss during a single wash[1]. Supports Large 3D Models Supports cleaning of models with build plate that the size is up to 12 inches (weight not exceeding 2.2 kg). [1] The alcohol consumption for a single wash is less than 50 milliliters, according to data from Anycubic Laboratory. It is recommended to replace or filter the detergent after cleaning 20 models. One-click Washing and Curing Complete Washing and Curing with a Dual-Function Button. Bid farewell to time-consuming and labor-intensive post-processing. Experience streamlined model processing that saves you time and effort. 360° Dimensional Curing Featuring a 360° automatic rotating curing platform, this machine provides higher curing energy values[2] and longer irradiation distances, enabling comprehensive, efficient curing for your models. [2]Data obtained from Anycubic Laboratory and tested for curing energy values. Artistic All-in-One Design Anycubic Wash & Cure Max machine features an elegant pearl white body complemented by a sleek gray-toned cover, exuding a fresh and minimalist aesthetic. The convenient all-in-one flip cover design allows for easy opening and closing. The user-friendly control panel interface ensures a smooth and seamless operation experience. Comprehensive Protection with Fault Detection Intelligent fault detection and alerting to inform users when doors are not properly closed, when water has entered the unit or outlets have become blocked during operation. Promptly identifies and resolves faults to ensure seamless washing and curing operations.

Price: 12.99 USD

Location: NJ/CA

End Time: 2024-04-29T08:09:52.000Z

Shipping Cost: 0 USD

Product Images

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Brand: Anycubic

Interface: USB 2.0

Manufacturer Warranty: 1 year

Model: Wash and Cure

Features: DIY Kit

3D Technology: LCD

MPN: Does Not apply

Maximum Print Size: Can't Print

Maximum Resolution: No

Nozzle Size: No

Printing Speed: Can't Print

Time selection: 1-60min

Unit Quantity: 1

Unit Type: Unit

Available Variations

Color: Wash & Cure 3

Price: 89 USD

Available Quantity: 25

Quantity Sold: 0

Color: Wash & Cure 3 Plus

Price: 169 USD

Available Quantity: 30

Quantity Sold: 1

Color: Wash & Cure Max

Price: 329 USD

Available Quantity: 10

Quantity Sold: 0

Color: Washing Container

Price: 22.99 USD

Available Quantity: 6

Quantity Sold: 0

Color: Washing Container

Price: 25.99 USD

Available Quantity: 9

Quantity Sold: 0

Color: Washing Container

Price: 25.99 USD

Available Quantity: 10

Quantity Sold: 1

Color: Washing Container

Price: 29.99 USD

Available Quantity: 50

Quantity Sold: 1

Color: Display Panel

Price: 16.99 USD

Available Quantity: 10

Quantity Sold: 0

Color: Display Panel

Price: 19.99 USD

Available Quantity: 10

Quantity Sold: 0

Color: Gooseneck Light

Price: 14.99 USD

Available Quantity: 10

Quantity Sold: 0

Color: Gooseneck Light

Price: 15.99 USD

Available Quantity: 10

Quantity Sold: 0

Color: Bucket Rotor

Price: 14.99 USD

Available Quantity: 10

Quantity Sold: 0

Color: Bucket Rotor

Price: 16.99 USD

Available Quantity: 10

Quantity Sold: 0

Color: Washing Basket

Price: 13.99 USD

Available Quantity: 5

Quantity Sold: 0

Color: Washing Basket

Price: 15.99 USD

Available Quantity: 5

Quantity Sold: 1

Color: Curing Table

Price: 14.99 USD

Available Quantity: 5

Quantity Sold: 1

Color: Curing Table

Price: 16.99 USD

Available Quantity: 5

Quantity Sold: 0

Color: Air Purifier

Price: 22.99 USD

Available Quantity: 9

Quantity Sold: 0

Color: Activated Carbon Filter

Price: 12.99 USD

Available Quantity: 15

Quantity Sold: 0

Color: Clean kit

Price: 29.99 USD

Available Quantity: 10

Quantity Sold: 0