AFCO Coil-Over Shock for Fits Mustang II, Chrome Plated

Description: Enhance the ride and handling performance characteristics of your Mustang II front end with this convenient bolt on coil-over kit, True bolt on kit that is designed for all specialty cars using a Mustang II front suspension with stock or tubular control arms, Ride height is adjustable from stock height to 2” lower than stock which enables you to fine tune the stance of your vehicle, Shocks are a steel body construction with a choice of black painted or beautifully chrome plated finish, Specifically designed for the Ford Mustang II platform and works well on stock Mustangs as well as hot rods with Mustang II front suspension AFCO Coil-Over Shock for Mustang II, Chrome Plated Sku # 1061055-CHR Mfr. Part # 1061055-CHR Condition New Brand AFCO Sold Each Details Info Bolt-in conversion allows coilover shock installation without any modifications Chrome plated or black painted steel body fixed valve monotube shock design Threaded shock sleeve, spring seat adjuster, and lock ring made from aluminum Fits factory Mustang II applications and aftermarket Mustang II front suspension Works with both stock strut rod supported lower control arm and tubular style lower Special tapered coilover springs required for installation Features adjustable ride height from stock to two inches lower Includes all mounting hardware for use with stock style lower control arms Convert Your Existing Mustang II Front Suspension to Coilovers with Zero Modifications Many Mustang II early adopters used an actual front suspension crossmember from the Mustang II or used an aftermarket budget or lower cost Mustang II IFS kit that usually end up with an OE-style fixed rate coil spring and basic shock absorber combo fitted to their Mustang II front suspension. This style of Mustang II front end used the stock stamped steel control arms. While this worked, it did not allow for ride height adjustment and finding the correct spring rate for your vehicle’s weight was a challenge. Upgrading to a coilover shock system, which provides an easy solution to ride height adjustments, low cost spring rate changes, and better handling, is often the preferred solution. Retrofitting Mustang 2 front coilovers to the stock Mustang II front suspension can be challenging, as a true coilover shock utilizes a threaded shock body that uses a fixed upper spring seat and an adjustable lower spring seat, eliminating the upper spring pocket on the Mustang II frame or welded component of a Mustang II suspension kit. This design is what gives the coilover shock its ability to easily adjust ride height and swap out spring rates depending upon front vehicle weight and application needs. To solve this issue, we have created an effective conversion kit to install Mustang II coilovers that requires no cutting, grinding, or welding and is a true bolt-in to stock or aftermarket Mustang II IFS systems at a great value. This Mustang II coilover shock retrofit will work with both stock stamped lower arms and aftermarket tubular lower control arms (both with and without strut rod systems). These are not universal coilovers that require modification to work on your Mustang II front suspension. Quality Materials in An Easy to Assemble Kit Our Mustang 2 coilovers are a bolt in retrofit with zero modifications while increasing overall suspension travel. Beginning with an AFCO steel monotube shock absorber, with a fixed valve rate (available in chrome or black painted finish), the correct hardware to make the shock a bolt-in retrofit is added along with polyurethane mounting bushings. We include the correct length 7/16-inch diameter through bolt for use with stock stamped steel lower control arms or Mustang II for use with strut rods. Must be used with 7/16" bolt application unless modification/use of a different bolt sleeve is utilized The kit includes a slip fit threaded sleeve and retainer that converts the AFCO steel body Mustang II shocks into a coilover-style shock with threaded body. Included with the sleeve is a black anodized lower spring perch that is threaded to make ride height adjustments, along with a black anodized locking collar to maintain your ride height setting. However, the really trick part of this conversion is our unique , sold separately. These are wound from premium chrome silicon spring material and available in four spring rates (375, 500, 600, and 700 lb/in rates for various front weights/engine combinations). We recommend our lightest 375 lb/in springs for vehicles like Model As and Ts, while the 500 and 600 lb/in springs are more suitable for heavier pre-war coupes and sedans. Heavier cars like 60s muscle cars might need to use our 700 lb/in springs depending upon engine size and accessories (AC, power steering, etc.). It is best to weigh your front frame section, engine, and accessories to determine final front suspension weight and choose your spring accordingly. The springs are tapered so that the upper spring diameter matches the stock Mustang II upper spring seat cup/pocket, yet the bottom of the spring necks down to a standard 2-1/2-inch ID to fit a standard coilover shock dimension, thus allowing a longer spring to fit in place for reduced spring rates and a better ride. Utilizing the factory upper spring pocket also places the spring’s load into the frame, as designed by Ford, versus a single shock mount like most aftermarket coilover conversion shocks, which was not designed to carry the vehicle's front weight and can lead to failure of the upper shock mount in extreme cases. Lastly, the springs are chrome plated to match the coilover shock body and hardware for that show winning appearance. Direct Fit to Your Mustang II IFS With No Special Tools or Welding Upgrading to our Mustang II coilovers couldn’t be easier. All you need to do is: 1. Remove your original shock absorber and coil spring 2. Fit the assembled coilover shock and spring into place 3. Secure with the included mounting hardware We suggest using our to eliminate metal on metal contact between the spring and the frame pocket that could create squeaks or noise during suspension movement if your original ones are damaged or missing. Once installed thread the coilover spring adjusters up or down to adjust your ride height (our makes the job easy) and even out the left and ride side of your front end and lock the adjustment down and you’re ready to hit the road with the perfect ride height and a great riding shock and spring package. The kit includes two chrome or black painted shocks and coilover conversion mounting kit. These can be used as service parts to our or used for a custom project/installation. NOTE: Not recommended for front axle weights more than 1,900 lbs. Specs Sold in Quantity Each Finish Chrome Shock Type Mono Tube Upper Shock Mount Stud Shock Body Material Steel Shock Body Type Smooth Mount Position Body-Down Lower Shock Mount Eyelet Adjustable No Compressed Length 8.13 Color Chrome Extended Length 11.5 Position Front Coilover Springs Included No Compressed Length Range 8.00" to 8.99" Extended Length Range 11.00" to 11.99" Shock Adjustability Non-Adjustable Height Adjustable Yes Shock Stroke 3.38 Coilover Kit Included Yes MFG. Part # 1061055-CHR Related Items / Suggested Parts Mustang II Coil-Over Replacement Spring 500 lb Rate QA1 T114W Spanner Wrench For Coil-Over Shocks QA1 9035-143 Shock Mount Sleeve, 1/2 Inch Inside Diameter Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 119.99 USD

Location: Lincoln, Nebraska

End Time: 2024-09-17T23:08:25.000Z

Shipping Cost: 0 USD