Adafruit Mini GPS Receiver PA1010D, UART, I2C, STEMMA QT / Qwiic, MTK3333, 4415

Description: Adafruit Mini GPS Receiver PA1010D, Uart, I2C, Stemma QT / Qwiic ,MTK3333, 4415The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Paradisetronic.com Your Store for DIY Electronics Adafruit Mini GPS Module PA1010D, UART, I2C, STEMMA QTThis GPS breakout board from Adafruit integrates GPS module with antenna in a compact design of only 25mm x 25mm. The control takes place either via I2C bus or UART interface.The PA1010D GPS receiver offers the following product features:Supports GPS, GLONASS, GALILEO and QZSS-165 dBm sensitivity, 10 Hz update frequencyup to 210 PRN channels, 99 search channels and 33 simultaneous tracking channelsOperation at 3.3 V - 5 V possible, only 30 mA current consumptionSuitable for breadboardRTC usable with optional batteryI2C and UART interfacePPS output with GPS fixInternal patch antennaLow power and standby modes with WAKE pinThe GPS board has an MTK3333 chipset and thus enables tracking of up to 33 satellites on 99 channels with a reception sensitivity of -165 dB and an integrated antenna. The current consumption is only 30 mA during navigation. If the GPS fix is found, the red LED flashes at approx. 1Hz - without GPS fix it is off.In order to keep the module as compact as possible, other components, such as an external antenna connection, were dispensed with. If necessary, you can solder on the button cell holder so that the integrated real-time clock can continue to be supplied with power even in the event of a power failure.Each board is delivered assembled and tested. The existing STEMMA QT resp. You can also use the Qwiic connection for prototyping STEMMA QT adapter cable To fall back on.For more information on the module and an extensive tutorial for use with Arduino and CircuitPython, please visit Adafruit's website: https://learn.adafruit.com/adafruit-ultimate-gps The GPS board has an MTK3333 chipset and thus enables tracking of up to 33 satellites on 99 channels with a reception sensitivity of -165 dB and an integrated antenna. The current consumption is only 30 mA during navigation. If the GPS fix is found, the red LED flashes at approx. 1Hz - without GPS fix it is off. In order to keep the module as compact as possible, other components, such as an external antenna connection, were dispensed with. If necessary, you can solder on the button cell holder so that the integrated real-time clock can continue to be supplied with power even in the event of a power failure. For more information on the module and an extensive tutorial for use with Arduino and CircuitPython, please visit Adafruit's website: https://learn.adafruit.com/adafruit-ultimate-gps Marke Adafruit EAN Nicht zutreffend Modell Adafruit Mini GPS PA1010D - UART and I2C - QT Herstellernummer 4415 Herstellungsland und -region Vereinigte Staaten Produktart Sensor

Price: 52.01 USD

Location: Berlin

End Time: 2024-11-20T19:59:51.000Z

Shipping Cost: 6.72 USD