52Pi 18650 UPS With RTC & Power Supply Device for Raspberry Pi 4 B / 3B+/ 3B

Description: If you want to buy in bulk, please note that Speedpak cannot send orders over $800, please choose Expedited Shipping. 52Pi UPS & UPS Plus（Remote OTA firmware upgrade & RTC &Coulometer） New UPS Mini Tower is here https://www.ebay.com/itm/185522954742[Description]UPS board supports Raspberry Pi 4B but also adds type C output. It provides enough power for the Raspberry Pi to make your Raspberry Pi still work while moving, and its design is so smart that you can get rid of troubled of a mass wire. This UPS can provide you with the operation of replacing the battery yourself. This new UPS not only supports an independent RTC module, but also provides a coulomb counter.You can obtain battery voltage and current information through I2C in the system. Combined with different programming methods, you can inherit the power information into the system. It is also convenient to detect the state of the battery, which can be detected and warned through the program. It can use most of the 18650 standard batteries and fully comply with the battery characteristics in terms of battery life. In addition, the power display provided on the circuit board is also very user-friendly. The illuminated LED light can quickly show the remain power and support the discharging while charging. You can directly connect to the external power supply for charging. At the same time, the Raspberry Pi will not be turned off.Please install the battery first, then connect the UPS to the Raspberry Pi.Connecting too many high-power peripherals will lead to insufficient power supply. Please pay attention to the power demand of peripherals.[Caution - Warning!]Warning!Please do not reverse the battery!This product belongs to the power supply device.Please keep it out of the reach of children. Please strictly refer to the instructions for the UPS product. If the battery polarity is reversed, it will directly burn the power management chip of the device and even cause fire or personal injury. Do not add any Components by yourself, all accidental damage caused by the cause is at your own risk.Make sure your power adapter capacity can cover lithium battery charging and raspberry pi use case, typically is 5V 3A or better should be used.(ex:Battery charge may require up to 2.1A, Raspberry Pi typically requires 0.6-0.8A, but up to 2.4A, at which if the power supply current is less than 4.5A, it may not be able to continue use)[ESD Warning]When connecting the battery, please do not touch the area where the yellow frame is located. ESD may cause damage to your device, so please avoid it.Changelogupdate: 2020-4-30Fixed some bugs.Upgrade the module functions, add RTC moudle and coulometer voltameter function.Adding more pogo-pin to support new features.Update the firmware version.Changed new conductor to support the new features.[Features]UPS New FeaturesRTC Independent ClockCurrent and Voltage ReadingBattery IndicatorProgrammable reading of battery voltage in OS（Not Batteries voltage）Charging Status LED indicatorUPS Plus New FeaturesEnhanced power managementRemote OTA firmware upgradeProgrammable BACK-TO-AC auto power upProgrammable sample periodI2C communicationStandalone RTCSupport stacked battery design[Old Features]LED remaining battery promptReplaceable battery solutionSupport Raspberry Pi 4B/3B+/3BCharging up to 2.1ARated discharge power is 15WExtended Two USBA port power outputExtended type C port power outputOutput overcurrent protectionTap to boot, long press to shut downSupport the charge and discharge power displayThe battery holder can be quickly replacedSynchronous switch charge and dischargeBuilt-in power path management, support side-loadingSupport load high current line compensation functionAdaptive charge current regulation to match all adaptersSupport LED power displayButton boot:UPS will start when the button is pressed, Long Press to force turn offLow power consumptionMultiple protection, high reliabilityOutput overcurrent, overvoltage, short circuit protectionInput overvoltage, overcharge, overdischarge, overcurrent discharge protectionMachine over temperature protection[Technical Support]https://wiki.52pi.com/index.php?title=EP-0118https://wiki.52pi.com/index.php?title=EP-0136[Package Includes]Bundle 11* UPS(With RTC & Coulometer)for Raspberry Pi 4B/3B+/3B4* M2.5* copper stick4* M2.5 screws4* M2.5* long copper stick4* M2.5 nuts1* Acrylic shield1* InstructionsBundle 21* UPS (With Remote OTA firmware upgrade &RTC & Coulometer) for Raspberry Pi4B/3B+/3B4* M2.5 copper stick4* M2.5 screws4* M2.5 long copper stick4* M2.5 nuts1* Acrylic shield1* InstructionsNote: 18650 Battery / Raspberry Pi Board are NOT includedBundle 3/4/5/61 x Wall Charger(US/UK/EU/AU)1 x Type C CableSpecification:Model：CA-46AInput：AC 100-240V 50/60Hz 0.5AOutput：3.6-6.5V 3A; 6.5-9V 2A; 9-12V 1.5V[Gallery]

Price: 12.99 USD

Location: shanghai

End Time: 2024-11-21T10:22:38.000Z

Shipping Cost: 0.9 USD