25mm 4W NUBM07 465nm Laser Diode In 25mm Copper Module W/Leads & DTR-G-8 Lens

Description: Listing is for a single 9mm 4W NUBM07 465nm laser diode mounted in a 25mm x 30mm copper module with thermal back half, DTR-G-8 glass lens and leads added. This module is designed for easy mounting in a 25mm XYZ mount that can be purchased separately like this one. SK-25 Bearing CNC Aluminum Rail Linear Motion Shaft Support Series Slide 25mm This diode is an amazing shade of blue and is capable of over 4W output when using a DTR-G-8 lens and 4A current with proper heatsinking. Save yourself the headache of pressing and soldering. Just add heatsink and driver limiting the current to 4A or less. Suggest 3.5A. Diodes are current hungry and as they heat up their internal resistance is lowered causing them to want to draw more current. Don't attempt to connect the diode directly to a fixed voltage source like a battery. You must use a laser driver limited to no more than 4A to power this diode. DTR-G-8 glass Collimating Lens.Broadband AR Coating 400nm-700nmYep this is the new DTR-G-8 Lens. See lens comparison on the testing thread over on the forums here.DTR-G-8 Finally a lens that removes near all aberrations caused by stray light, compacts the output for a greatly reduced spot size while maintaining a 90% pass efficiency compared to a 96% pass efficiency using a real DTR-G-2. Suggested Drivers I carryACS4500BU Laser Driver Blackbuck 8M Laser Driver Here is what you get. One 9mm 4W NUBM07 465nm diode mounted in a large 25mm x 30mm copper module with leads and DTR-G-8 glass lens. Here is one mounted in a 25mm XYZ mount that you can purchase separately like this one. SK-25 Bearing CNC Aluminum Rail Linear Motion Shaft Support Series Slide 25mm *Disclamer*

Price: 135 USD

Location: Saint Louis, Missouri

End Time: 2023-11-09T02:48:19.000Z

Shipping Cost: 0 USD