Description: 5 Ton quint Zone Mini Ductless Split Air Conditioner 63000 BTU 36,000 BTU Ductless Mini Split AC 21 SEER Efficiency w/ Heat Pump Technology With a 36000 BTU total Cooling-Heating Capacity, this Inverter DC mini split system can cool or heat 4 seperate 9000-9000-9000-9000 BTU zones [350 + 350 + 350 + 350 ft²] for a total coverage area of 1400 ft². A 21 SEER rating coupled with Inverter technology provides the benefits of low operation temps, rapid cooling as well as maximum energy efficiency. Includes LCD remotes. Installation Kits (Linesets and wire) sold seperately. SystemFeaturesSpecificationsSetup - InstallationWarrantyShippingAccessories Technical Data:System Includes: 36000 BTU Cooling Capacity: (9k + 9k + 9k + 9k) 36000 BTU Heat Pump Capacity: (9k +9k + 9k + 9k)INVERTER DC TECHNOLOGY: 21 SEERQuad-Zone Setup (4 Air Handlers)1 Year Parts - 5 Year Compressor Warranty View Details > Indoor Units - Air Handler [x 4]Outdoor Compressor w/ Total Rating of 42,000 BTU'sDigital, Multi-function LCD Remote Control [x 4]Filtration Screens - Multi Folds Evaporator *When all four air handlers are running simultaneously at full capacity, the total combined BTU output is limited to that of the outdoor condenser. Top Line Features:Quad Air Handlers for Multi-Zone PlacementINVERTER DC TECHNOLOGY: 21 SEER Intelligent Mechanical DefrostingWashable Filters - Biologically Actv EnzymeLow Startup Temps - MAXIMUM EFFICIENCYPre-charged with freon .Sleep Mode - 24 hour ON/OFF Timer - MemoriesEnhanced Copper Coil - Wide Angle Air SpreadFlexible, Quick Installation - Easy Operation** Installation Lineset Sold Seperately: Available in 15-75ft Lengths. Contact us for customized package or Click here to Purchase. 9000 BTU Indoor Air Handler Specs: CLICK TO ENLARGE Outdoor Compressor Unit Specs: CLICK TO ENLARGE WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation. Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split* See Installation Tip. A certified HVAC technician must conduct / complete the installation to be eligible for the warranty. (See warranty details below > ) *5 Year Compressor - 1 Year on all other Parts* Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and brand new exchange will be shipped out. Download Manual - Warranty Polices > These Mini Split units usually ship via SAIA Motor Freight (on truck) or some other freight service. These units ship out of Missouri and are in transit with 2 business days from payment receipt. Depending on where you are geographically located, transit time is usually between 3 and 6 business days. Please provide a contact phone# upon checkout where recipient of order can be reached. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. Condenser Ground Stand - Provides Flat even surface - Avoids debris obstruction Price: $83.00 Click for more Info Lineset (1/4 x 3/8) - Required for Installation 15ft > 75ft Length Options Price: $64.00 > $224.00 Click for more Info Condenser Bracket - Mount your condenser at any height on an outdoor sidewall Price: $96.00 Click for more Info Micro-Pump II - Required when mounting air handler on Interior wall Price: $182.00 Click for more Info Electrical Wire Harness - 16/4 Electrical Wire Harness - For Extending Evap. Length Price: $1.75 / ft Click for more Info Additional Remote Controls - Spare remote controls for the T1 Series Ductless System Price: $49.00 Click for more Info Lineset Covers - Available in different sizes - Concels and protects linesets Price: $12.00 - $115.00 Click for more Info Programmable Thermostat - Permanently Hard Mounts - Programs 7 days a week Price: $112.00 Click for more Info Swap 1 - 18k Wall Mount for Ceiling Cassettes: (+) $125Swap all 4 Wall Mounts for Ceiling Cassettes: (+) $500 Swap 1 - 18k Wall Mount for Susp. Ceiling Mount: (+) $178*If alternate air handler types are preferred, request invoice with preferred options upon checkout or contact us. View the Mini Split FAQ >View the Mini Split Outline Diagram >Click to contact us >
Price: 4060.45 USD
Location: Warren, Michigan
End Time: 2024-08-29T16:07:50.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
BTU Cooling Rating: 25000 BTU or Greater
Model: WMMS-31 9+9+9+9
Number of Cool Speeds: Variable
Blower Motor Speed: Variable Speed
Size: 3 tons
Power Phase: 1 Phase
Material: Aluminum, Copper
Energy Star: Compliant
SEER: 21
Cooling BTU/Hr: 36000
Power Source: Corded Electric
Number of Zones: 4
Type: Ductless Mini-Split with Heat Pump
Features: Ductless, Adjustable Thermostat, App Compatibility, Auto Cool, Digital, Digital Display, Drain Hose Connection, Eco-Friendly, Fan Only Option, Indoor/Outdoor, Rechargeable, Sleep Mode, Smart Connectivity
SEER Rating: 21
Timer Control: 24 Hours
Smart Home Protocol: Infrared, Z-Wave
Color: White
Year Manufactured: 2019
MPN: 36000 BTU Quad Zone Thermocore AC
Energy Efficiency Ratio (EER): 11.1-12
Mounting Location: Wall
Number of Fan Motors: 1
Area Covered: Greater Than 1000 sq ft
Number of Heat Settings: Variable
BTU Heating Rating: 30000-39999 BTU
Brand: Thermocore Systems
Manufacturer Warranty: Other: See Item Description
Control Style: Digital, Remote Control
Compressor Type: Rotary & Impeller
Items Included: Drain Hose, Remote Control
Heating System: Heat Pump
Number of Compressors: 1
Voltage: 208/230 V
