Description: Listing is for a single 1.8A SXD Super X-Drive Bucking Laser Driver. The X-Drive is an extremely efficient buck style regulator with many built in safety features to protect and give long life to your laser diodes. Driver has soft start, overshoot protection and very low noise as well as self bleeding output caps to prevent spikes by charged output caps that so many diodes have been lost to from other drivers. This version of the driver is suited to work with the M140, NDG7875, NDB7675, NDG700, NDG7475, NUGM01 or the PLTB450B laser diodes using a 7-12V power source capable of 2A+ like two Li-ions in series. Input and output pads are clearly marked for easy installation. Here are a some pictures of the dimensions: SXD Super X-Drive TTL control. These instructions are only if you plan to use TTL to control the driver. If you don't plan on using TTL the driver will work as is no need to modify anything.:) PWN/TTLModulation Frequency: Up to 1kHz Modulation Voltage 0-5V Full range: 1.6V ON "Max 12V" & 0.6V - 0V OFF Solder the modulation Wire to the Yellow Arrow after removing the 10K.^^^^ Like SO: Enable Pin is High "ON" Minimum 1.6V with an Ultimate MAX of 12V inputEnable Pin is Low "OFF" 0.6V or lower 12V MAX the enable pin can take. Remove the Ramp Up Capacitor.
Price: 30 USD
Location: Saint Louis, Missouri
End Time: 2023-09-12T02:08:50.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
MPN: Does Not Apply
Brand: DTR's Laser Shop
Country/Region of Manufacture: United States
